r686st Posted December 25, 2014 Share Posted December 25, 2014 Can anyone tell me the years/models that were available? Also when did it change from Neway to the "Mack" air suspension? Quote Link to comment Share on other sites More sharing options...
gearhead204 Posted December 25, 2014 Share Posted December 25, 2014 we had a rw713 with nuway that truck was a 1988 Quote Link to comment Share on other sites More sharing options...
Superdog Posted December 25, 2014 Share Posted December 25, 2014 I believe the first Mack I saw with the Mack adopted Hendrickson air ride was a '89 Superliner,my '88 is Neway.Neway goes way back into the '70's if not a little farther. Page & Page had an air ride set up that I've seen on an older Western R and I've seen another called Western air,which later ,I've been told but can't confirm,became Pete air leaf used on some older Hayward Macks. 1 Quote Link to comment Share on other sites More sharing options...
r686st Posted December 30, 2014 Author Share Posted December 30, 2014 I'm looking at a 1992 RW and it has air suspension. I'm confused because the hangers have "Mack" on them so does this mean it's Hendrickson rebadged? Quote Link to comment Share on other sites More sharing options...
Superdog Posted December 30, 2014 Share Posted December 30, 2014 I'm looking at a 1992 RW and it has air suspension. I'm confused because the hangers have "Mack" on them so does this mean it's Hendrickson rebadged?yep Quote Link to comment Share on other sites More sharing options...
57 bcr Posted December 30, 2014 Share Posted December 30, 2014 I think Western Stabile-Aire became Freightliner Air-Liner,Mike. Although the 1st trucks I seen it offered on was the "Petercars" before they developed their Air Leaf. I have a Western Stabile-Air cut off that was on a '76 K-100 parts truck I cut up.It had been grafted on that truck from a Marmon. The rear axle/suspension is going on my Ford C-8000.How's that for an extended life? Quote IF YOU BOUGHT IT, A TRUCK BROUGHT IT..AND WHEN YOU'RE DONE WITH IT, A TRUCK WILL HAUL IT AWAY!!! Big John Trimble,WRVA Link to comment Share on other sites More sharing options...
Superdog Posted December 30, 2014 Share Posted December 30, 2014 I think Western Stabile-Aire became Freightliner Air-Liner,Mike. Although the 1st trucks I seen it offered on was the "Petercars" before they developed their Air Leaf. I have a Western Stabile-Air cut off that was on a '76 K-100 parts truck I cut up.It had been grafted on that truck from a Marmon. The rear axle/suspension is going on my Ford C-8000.How's that for an extended life?I knew it was something like that,Al. Quote Link to comment Share on other sites More sharing options...
gearhead204 Posted December 30, 2014 Share Posted December 30, 2014 did page &page get bought up or just die? the 67 pete I drove had it, other than that I have only seen some on old log trailers or belly dumps as trailer susp. never came across any more truck susp. Quote Link to comment Share on other sites More sharing options...
mackdaddy Posted December 30, 2014 Share Posted December 30, 2014 The Mustang H model has the original western air on the driver and tag. I have the manuals for it. Western was sold to Peterbilt. 2 Quote Link to comment Share on other sites More sharing options...
b61mack Posted December 30, 2014 Share Posted December 30, 2014 I have a 72 RS700L with a V8 that has the Page & Page Dial-A-Ride, it has the 2 springs plus the 4 air bags, Mack rears, 3.86 gears. back in the 70s I new a guy that had a 69 I think RS700L that had a 318 Detroit 13 speed with the same suspension. 2 Quote Link to comment Share on other sites More sharing options...
r686st Posted January 5, 2015 Author Share Posted January 5, 2015 Superdog, Is there suppose to be a Torque rod or two between the two carriers in this picture? It does have the Traverse torque rods that go from each carrier to the frame. FYI: It's a RW with "Mack" air ride. Quote Link to comment Share on other sites More sharing options...
Superdog Posted January 5, 2015 Share Posted January 5, 2015 just the one to the frame Quote Link to comment Share on other sites More sharing options...
r686st Posted January 5, 2015 Author Share Posted January 5, 2015 So just one Torque rod from the front carrier? I didn't see any way to attach it to the frame. The one pictured would be in the way wouldn't it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.