Eastcoastdiesel Posted January 14, 2015 Share Posted January 14, 2015 I just did a pretty big job for a company, which consisted of: -replaced camshaft-replaced 2 lifters-replaced rods and mains-replaced oil pump-replaced cylinder heads and liners for 1,2,and 3-replaced oil and filters-replaced oil pan gasket and grommets. Thank you! Just don't know how many hours to charge. Quote Link to comment https://www.bigmacktrucks.com/topic/38441-help-on-billing/ Share on other sites More sharing options...
r686st Posted January 14, 2015 Share Posted January 14, 2015 Sounds like at least a $2,xxx something job to me, just for the rods/mains, that's just my experience with repairs. Your probably going to be between $8-10K by the time your done. I'm assuming it will be less is your not marking up parts prices. Quote Link to comment https://www.bigmacktrucks.com/topic/38441-help-on-billing/#findComment-274281 Share on other sites More sharing options...
1958 F.W.D. Posted January 14, 2015 Share Posted January 14, 2015 ECD, go on my FB page and post the question to my FB buddies Eric Zweier and Jimmy Miller. Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/38441-help-on-billing/#findComment-274286 Share on other sites More sharing options...
rick harper Posted January 14, 2015 Share Posted January 14, 2015 APPROX 35 TO 45 HOURS WORTH OF WORK THERE. TIMES YOUR LABOR RATE. Quote Link to comment https://www.bigmacktrucks.com/topic/38441-help-on-billing/#findComment-274324 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.