Coenut Posted March 1, 2015 Share Posted March 1, 2015 How heavy is the hub and drum combo on a dayton rear axle setup. I will be rebuilding the rear brakes on the f. I'm looking for tips to remove this without damaging parts, or hurting myself. I thought of making a dolly that will lift and support tires, hub drum. Allowing me just unbolt axle and axle nut, and slide complete unit off of axle housing. Any thoughts Quote Link to comment https://www.bigmacktrucks.com/topic/39108-how-heavy-is-a-dayton-hub-with-the-drum-attached/ Share on other sites More sharing options...
Joe Ditchkus Posted March 1, 2015 Share Posted March 1, 2015 Just use a flat sheet of metal or plywood greased up good. It will slide no problem. Joe D. Quote Link to comment https://www.bigmacktrucks.com/topic/39108-how-heavy-is-a-dayton-hub-with-the-drum-attached/#findComment-281022 Share on other sites More sharing options...
GreenGiant2 Posted March 1, 2015 Share Posted March 1, 2015 Floor Jack works good Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment https://www.bigmacktrucks.com/topic/39108-how-heavy-is-a-dayton-hub-with-the-drum-attached/#findComment-281024 Share on other sites More sharing options...
mrsmackpaul Posted March 1, 2015 Share Posted March 1, 2015 yep all of the above I leave the wheels on the hub and slide the whole lot off as one a pallet jack works wellPaul Quote Link to comment https://www.bigmacktrucks.com/topic/39108-how-heavy-is-a-dayton-hub-with-the-drum-attached/#findComment-281029 Share on other sites More sharing options...
carlotpilot Posted March 1, 2015 Share Posted March 1, 2015 How heavy is the hub and drum combo on a dayton rear axle setup. I will be rebuilding the rear brakes on the f. I'm looking for tips to remove this without damaging parts, or hurting myself. I thought of making a dolly that will lift and support tires, hub drum. Allowing me just unbolt axle and axle nut, and slide complete unit off of axle housing. Any thoughtsanswer to your question is approx. 400 pounds Quote Link to comment https://www.bigmacktrucks.com/topic/39108-how-heavy-is-a-dayton-hub-with-the-drum-attached/#findComment-281031 Share on other sites More sharing options...
jakebrake86 Posted March 1, 2015 Share Posted March 1, 2015 I usually wrap a couple of fan belts together and loop it under the hub, then pull it off. It works best with two people. Quote Jake Link to comment https://www.bigmacktrucks.com/topic/39108-how-heavy-is-a-dayton-hub-with-the-drum-attached/#findComment-281082 Share on other sites More sharing options...
TRH Posted March 6, 2015 Share Posted March 6, 2015 Heavy enough to kick your ass. Leave the tires on and use a sheet of vinyl mudflap or something similar. Daytons are why we have wheel dollies, hub/drum is about 325lb Quote Link to comment https://www.bigmacktrucks.com/topic/39108-how-heavy-is-a-dayton-hub-with-the-drum-attached/#findComment-281637 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.