Jump to content

Recommended Posts

Mack made a rear mount pto that will fit the 2 stick 6 speed and 12 speed transmissions. as long as the 12 speed has the splined countershaft it should install just like they did with 6 speed.

Look at the rear countershaft covers for a stamp to indicate it is splined. It should be stamped with a "s" or an "x" I can't recall

If you want a married pto/pump unit the 6 and 12 speed has provisions for 6 and 8 bolt ptos

I don't recall a rear mount married pto as an option from Mack or other vendors?

In my opinion the Mack pto was the better of the 2 options.

Link to comment
https://www.bigmacktrucks.com/topic/39251-pto-question/#findComment-282531
Share on other sites

Thanks i had a rear mount and then switched to the side mount when we installed a drop axle because there wasn't enough room for the two piece rear mount,the shop that did the work told me at first he would install a one piece rear mount but then said he couldn't find one and went wit a side mount,maybe ill give mack a call,the side mount is a pain in the ass to use..

Link to comment
https://www.bigmacktrucks.com/topic/39251-pto-question/#findComment-282563
Share on other sites

I've had a few over the years but never seen a pto/pump rear mount. I have the side mount combo on my tri-axle and like you said, I don't think there would be enough room. My superliner with a 12 speed has the rear mount but the pump is mounted back on the frame with a short shaft.

Live every day like it's your last, because one of these days, it will be.

Link to comment
https://www.bigmacktrucks.com/topic/39251-pto-question/#findComment-282569
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...