Coenut Posted April 11, 2015 Share Posted April 11, 2015 Anyone ever have to replace one the these pumps. Motors an endt 675 with 3 groove pulley on it. Book lists my pump as 316gca 487 p1. Not sure which pump to buy. Have not taken the pump off yet. Any help would be great. Quote Link to comment https://www.bigmacktrucks.com/topic/39656-endt-675-water-pump-with-3-groove-pulley/ Share on other sites More sharing options...
j hancock Posted April 11, 2015 Share Posted April 11, 2015 Check out page 14-33 and 14-34.http://truckpartsetc.com/sales/PDFs/Haldex/Haldex_WaterPumps_14.pdf Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/39656-endt-675-water-pump-with-3-groove-pulley/#findComment-286362 Share on other sites More sharing options...
RAYMAC Posted April 11, 2015 Share Posted April 11, 2015 yer there is a long shaft pump and a short shaft at least on the 285 coolpower motors had one start leaking bad so mechanic orders one in puts it on every thing is running out of alignment by a couple of inches pull it back off and compare it to old pump which which is a couple inches shorter shaft just another trap when your not in the know regards ray Quote Link to comment https://www.bigmacktrucks.com/topic/39656-endt-675-water-pump-with-3-groove-pulley/#findComment-286364 Share on other sites More sharing options...
Coenut Posted April 12, 2015 Author Share Posted April 12, 2015 Thank you for the help. This was not one of the things that I thought i would need to fix. But on the first shakedown coolant was pouring from the weep hole. Oh we'll at least I didn't drain and fill with fresh coolant first. Quote Link to comment https://www.bigmacktrucks.com/topic/39656-endt-675-water-pump-with-3-groove-pulley/#findComment-286388 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.