teleman Posted April 29, 2015 Share Posted April 29, 2015 Hi...My pinion seal is leaking so I got under to check it out and found that the rubber dust shield/cover is missing off the yoke...I called around with no luck and checked with Watts Mack and they cant get it...Ive got the seal and a sleeve for it but no dust shield...does anyone have any idea where to get one/make one or just run without it...it wasnt there so its hard to tell how long its been gone..thanks Jim Quote Link to comment https://www.bigmacktrucks.com/topic/39851-b-61-t-pinion-seal-dust-shield/ Share on other sites More sharing options...
rick harper Posted April 29, 2015 Share Posted April 29, 2015 run it. Quote Link to comment https://www.bigmacktrucks.com/topic/39851-b-61-t-pinion-seal-dust-shield/#findComment-288251 Share on other sites More sharing options...
Brocky Posted April 29, 2015 Share Posted April 29, 2015 If it is a hobby truck just going to shows I would not worry about it.. You can always fabricate one.. How about the bottom of a 2 liter pop bottle??? or something simalier?? 1 Quote Brocky Link to comment https://www.bigmacktrucks.com/topic/39851-b-61-t-pinion-seal-dust-shield/#findComment-288253 Share on other sites More sharing options...
teleman Posted April 30, 2015 Author Share Posted April 30, 2015 Thanks....I put about 400 miles on it last year and Im planning a couple road trips for this summer....hope to make to the Watts show...anyway Im going to replace the seal and put the sleeve on and go for it...I hadnt noticed it leaking till I ran it down rt. 250 at 55-60 all the way...Im going to check the vent also...thanks Jim Quote Link to comment https://www.bigmacktrucks.com/topic/39851-b-61-t-pinion-seal-dust-shield/#findComment-288291 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.