Custom Kenworth K200 hits the right note for James Aquilina

[kscarbel2]

Owner/Driver / June 5, 2015

When he couldn't get a T409 made to order, James Aquilina decided a custom K200 8x4 was the way to go.

It’s hard to miss James Aquilina’s blue Kenworth K200 8x4. It’s not only purpose-built but an eye-catching rig as well.

James, who hauls scrap metal as a sub-contractor to Sims Metal Management, was in the market for a new cab-over, so he went for a Kenworth.

Initially, he spotted a T659 8x4 at last year’s Melbourne Truck Show and made a few inquiries to Kenworth salesman Steve Connally.

"I was told it was going to NZ [New Zealand], so I went to the Steve and told him that I wanted a T409 with a 21 IT sleeper with 550hp [410kW]. I thought I had found my new truck," James says.

However, a chat with Kenworth’s engineering department revealed that the T409 would be too long.

"I went back to Steve and asked him what my options were. It was either lose the sleeper or change to a K200," James says.

"I was told that the Kenworth cab-overs had changed a bit from what I remembered, so I went for a drive and was quite impressed."

Kenworth built James’ custom K200 truck in seven weeks.

"The salesman Steve Connally had been selling Kenworths for over 10 years. The truck was his first 8x4 K200, as most of the 8x4s either go west or across the ditch to New Zealand. This one is something different," he says.

James opted for a sleeper cab on the K200 due to the large amount of country work he does.

He also had the Kenworth specced with an 18-speed, double overdrive gearbox with 4.11 ratio, which keeps the engine speed down while returning good fuel consumption figures.

"I go as far west as Terang, Ballarat, Nhill and a couple of jobs in Horsham that I do, so I get around," he says.

James says he would have loved to add some bling to the K200, but he adds that it was bought to work.

When it gets down to the job, shiny bits don’t count. But he remains proud of his fleet.

"Each truck is washed every week and we look after them," James says.

Related photographs: http://www.ownerdriver.com.au/industry-news/1506/custom-kenworth-k200-hits-the-right-note-for-james-aquilina/