rhpaulin309 Posted July 12, 2015 Share Posted July 12, 2015 I have an reaccuring fault code concerning high speed link from ECM to engine that shuts down engine.Similar problem was an easy fix on my 99 CH, high speed cable and Deutch connector were right there with the other harnesses, but is nowhere to be found on this one. I have opened the one harness that was big enough to hold a Deutch connector following instruction from local dealer with no luck.Have they supressed the seperate high speed link and integrated it with the main harness? Pulling hard on the cable harness will allow motor to startup again so i am getting warm... Had to pull truck off of job this weekend because of this. Quote Link to comment https://www.bigmacktrucks.com/topic/40883-high-speed-link-location-on-06-cxu/ Share on other sites More sharing options...
Mitchell Thomas Headen Posted July 13, 2015 Share Posted July 13, 2015 Hey Man. If you find out let me know. I have a 99 CX613. Im not sure how similiar they are, but i'm having a hard time just finding anything about fuse and relay locations. The dash mounted fuse block doesn't have a diagram on it and it's got those old style metal fuses and I cant tell whats blown and what isnt. If i just knew what to check and where it was would be a big help. Good luck with your problem bro. I hope you get back up and running. Quote Link to comment https://www.bigmacktrucks.com/topic/40883-high-speed-link-location-on-06-cxu/#findComment-296540 Share on other sites More sharing options...
wheeler73 Posted July 14, 2015 Share Posted July 14, 2015 The high speed data link is not seperate it is in the harness. What year is the truck and which part of the harness are you pulling on? Quote Link to comment https://www.bigmacktrucks.com/topic/40883-high-speed-link-location-on-06-cxu/#findComment-296604 Share on other sites More sharing options...
turckster Posted July 28, 2015 Share Posted July 28, 2015 You have 2 communication systems on most modern Macks- The high speed J1939 system and the slower j1587. The engine will run if one or the other is lost but will not run if both are gone. Sounds like you are loosing either power or ground to your engine ecu, therefore you get loss of communication. Everything is integrated into the chassis harness-ABS, communication(J1939 can1 and can2, J1587) and chassis wiring. Quote Link to comment https://www.bigmacktrucks.com/topic/40883-high-speed-link-location-on-06-cxu/#findComment-298194 Share on other sites More sharing options...
Dieselwrenches Posted August 2, 2015 Share Posted August 2, 2015 High speed is j1939, that is the twisted yellow and green wires. Quote Link to comment https://www.bigmacktrucks.com/topic/40883-high-speed-link-location-on-06-cxu/#findComment-298728 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.