Black71gp Posted July 25, 2015 Share Posted July 25, 2015 Hello, I found a 95 ch613 tandem dump truck I am looking at, it has the e7 350, in it, with a eaton 7 speed Trans. Question is how is that Trans with the e7, and in a dump, not gonna be used for dirt moving much, mostly for pulling equipment around. Will be plated at 54k so never heavier than that. I know there are a few things to tune the engine a little I like the truck but just wondering on the Trans. My current single axle mid liner Mack is a 7 speed and it does ok. Just need a little more power for some larger equipment. Thanks for any thoughts Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/ Share on other sites More sharing options...
Black71gp Posted July 30, 2015 Author Share Posted July 30, 2015 No one used a 7 speed in a tandem? Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298375 Share on other sites More sharing options...
TeamsterGrrrl Posted July 30, 2015 Share Posted July 30, 2015 Most CHs were built as road tractors with 12k and 40k axles on the tandems. Thus this is probably a converted tractor with possibly a stretched wheelbase. With the weight limits in most places limiting the rear axle load to 34k it's effective GVW is only 46k and there's no point in licensing it for more unless you need to pull a trailer. This truck will work OK for on highway use as intended, but for anything more severe you need a proper vocational truck like an RD, DM, or Granite. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298400 Share on other sites More sharing options...
Black71gp Posted July 30, 2015 Author Share Posted July 30, 2015 (edited) Thanks, I figured was a road tractor, doesn't really bother me, I mostly need it for hauling equipment, 28k excavator and a 20 ton trailer. Not much material in the dump box.The 7 speed just seems not enough for pulling a load around. Edited July 30, 2015 by Black71gp Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298415 Share on other sites More sharing options...
j hancock Posted July 30, 2015 Share Posted July 30, 2015 For what you are doing, it should be ok. Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298419 Share on other sites More sharing options...
rick harper Posted July 30, 2015 Share Posted July 30, 2015 I don't think you will like a 7sp. You'll either be lugging in 7th or gear bound in 6th. Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298420 Share on other sites More sharing options...
mackncheese Posted August 2, 2015 Share Posted August 2, 2015 I have a 99 rd690s with a Mack 7 sp and I hate it. I love the truck but hate the way it pulls. Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298750 Share on other sites More sharing options...
gearhead204 Posted August 2, 2015 Share Posted August 2, 2015 I love a mack 12sp. in a dump truck! 5 speeds reverse is great! you have a gear for all conditions and applications. Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298753 Share on other sites More sharing options...
MackMack613 Posted August 2, 2015 Share Posted August 2, 2015 My 93 ch has a e7-350 with a super 10 in it and I've got it at 54k and pulling trailer and loads it has no problems. I've never drove one with a 7 so I can't really say what the power difference would be. But if the price is right it would be a good dual purpose truck for your outfit Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298759 Share on other sites More sharing options...
1965 Posted August 2, 2015 Share Posted August 2, 2015 I got a friend who has a 94 ford; it was an old concrete truck it has the L10 cummins I think 300hp but has the eaton 7LL trans.; other than the weird shift pattern I think it does good for a dump truck; haven't pulled anything with but does good with 14 tons on it Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298766 Share on other sites More sharing options...
Black71gp Posted August 2, 2015 Author Share Posted August 2, 2015 Thanks, asking 14k for the truck. Looks really clean. 575k miles or so. I gotta go drive it and see how the 7 feels, it's just a straight 7, no low or anything else. Seems like the same as my 88 cm400, but with more hp. Thanks for the inputs Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298767 Share on other sites More sharing options...
MackMack613 Posted August 3, 2015 Share Posted August 3, 2015 That's what everyone is here for Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298832 Share on other sites More sharing options...
TeamsterGrrrl Posted August 3, 2015 Share Posted August 3, 2015 The Eaton 7 speeds top 4 ratios are about the same as a 9 speed, the bottom gears have the wider spread. Works OK on the highway, but marginal off highway. Quote Link to comment https://www.bigmacktrucks.com/topic/41079-shopping-for-a-mack-dump-few-questions/#findComment-298849 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.