hicrop10 Posted September 1, 2015 Share Posted September 1, 2015 Thinking of removing this switch.What else has to be changed other then the starter,this being changed over to a 50mt 12 volt starter.Thanks for any help. Quote Link to comment https://www.bigmacktrucks.com/topic/41595-replacing-series-parallel-switch/ Share on other sites More sharing options...
j hancock Posted September 1, 2015 Share Posted September 1, 2015 This thread has some good info.http://www.bigmacktrucks.com/index.php?/topic/27909-b61-to-12-volts/?hl=series#entry147276 Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/41595-replacing-series-parallel-switch/#findComment-302240 Share on other sites More sharing options...
eddeere Posted September 1, 2015 Share Posted September 1, 2015 I changed mine over to a 42 MT 12 volt starter. I made sure the battery cables were in parallel as I had to move the batteries. When I bought the starter they suggested I put in an extra solenoid between the starter button and starter solenoid. Did not have any problems but only used it a couple of times. Since have removed all the wiring as it was a real mess. Quote Link to comment https://www.bigmacktrucks.com/topic/41595-replacing-series-parallel-switch/#findComment-302243 Share on other sites More sharing options...
eddeere Posted September 1, 2015 Share Posted September 1, 2015 Mike D. One thing I remembered was I had a clearance problem and had to bend the vent pipe & fab. a new mount. You can rotate the starter and move it in a number of small steps. The solenoid was always it the way. A 50 or 39 may have ben better. You may or may not have more room on your Cummings. Quote Link to comment https://www.bigmacktrucks.com/topic/41595-replacing-series-parallel-switch/#findComment-302259 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.