1957B61Vt Posted September 12, 2008 Share Posted September 12, 2008 Hi guys we are working on my B-61T contour cab had some issues with rust high in the corners of cab in rear Icut it all out and found a doner cab to cut up for patches it is all welded back together we had to straighten the roof some took out all the filler someone put in trying to check the fit of rear window cant find a replacement gasket anywhere it appears to be wider than a standard b model cab rubber Been to all my local glass shops and body supply spots no luck even at the b model store any info would be greatly appreciated Thank's Steve Quote Link to comment https://www.bigmacktrucks.com/topic/4200-b-61-t-contour-cab-rear-window-gasket/ Share on other sites More sharing options...
Rob Posted September 12, 2008 Share Posted September 12, 2008 Hi guys we are working on my B-61T contour cab had some issues with rust high in the corners of cab in rear Icut it all out and found a doner cab to cut up for patches it is all welded back together we had to straighten the roof some took out all the filler someone put in trying to check the fit of rear window cant find a replacement gasket anywhere it appears to be wider than a standard b model cab rubber Been to all my local glass shops and body supply spots no luck even at the b model store any info would be greatly appreciated Thank's Steve Steve: Post a photo cross section of the gasket/seal with a note depicting actual measurements. I can usually come up with generic material that will work.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/4200-b-61-t-contour-cab-rear-window-gasket/#findComment-21957 Share on other sites More sharing options...
vanscottbuilders Posted September 12, 2008 Share Posted September 12, 2008 Steve,If you could post a cross-section, as Rob asks, I would appreciate it.I'm in the same boat, looking for the same stuff.My understanding is that the contour window doesindeed use the same gasket molding as the flat window.Thanks,Paul Van Scott Quote Link to comment https://www.bigmacktrucks.com/topic/4200-b-61-t-contour-cab-rear-window-gasket/#findComment-21961 Share on other sites More sharing options...
1957B61Vt Posted September 12, 2008 Author Share Posted September 12, 2008 Steve: Post a photo cross section of the gasket/seal with a note depicting actual measurements. I can usually come up with generic material that will work.Rob Sorry cant send pictures yet I have measurements as close as i can get with a tape 7feet long 1and5/8 inches across outside. pinchweld area is 7/8inches deep and 1/8inch thick glass measures about 1/4 inch thick and sits in gasket about 1/4 if it would help you I can cut off a piece and send it to you no one in my area seems willing to try to help as far as auto glass shops and parts houses thanks steve Quote Link to comment https://www.bigmacktrucks.com/topic/4200-b-61-t-contour-cab-rear-window-gasket/#findComment-21963 Share on other sites More sharing options...
fifth wheel Posted September 13, 2008 Share Posted September 13, 2008 I have the rubber seal you need, it is unique to the concave cab.Neil Quote Link to comment https://www.bigmacktrucks.com/topic/4200-b-61-t-contour-cab-rear-window-gasket/#findComment-21964 Share on other sites More sharing options...
1957B61Vt Posted September 13, 2008 Author Share Posted September 13, 2008 I have the rubber seal you need, it is unique to the concave cab.Neil Thank you for the reply is it new and would you sell it ? My email address is fordtruck1969@yahoo.com let me know . thank you Steve Quote Link to comment https://www.bigmacktrucks.com/topic/4200-b-61-t-contour-cab-rear-window-gasket/#findComment-21965 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.