Keffer inc Posted November 14, 2015 Share Posted November 14, 2015 I'm getting to the point of needing new springs, repainting my truck, replacing the fuel tanks (or repairing their dents). But with all the work in my future, I was thinking while I'm at it, how hard would it be to convert my SBA (Set Back Axle) to a SFA (Set Forward Axle)?I know I need the 1.Hood, 2. Bumper, and 3. Shorter drag link (from the steering box to the steering knucle) And then move the battery and fuel tanks forward and add a second battery box on the pass side. And I'm assuming I can re-use my current steering axle? Am I missing anything? Quote Link to comment Share on other sites More sharing options...
Superdog Posted November 14, 2015 Share Posted November 14, 2015 It's not that difficult,the guy that bought my '99 CH has done several. I lost his phone# but his name is Joey Sherman,I know he used to check this site once in awhile. Quote Link to comment Share on other sites More sharing options...
wilbur Posted November 16, 2015 Share Posted November 16, 2015 I think the spring hangers have to be moved also. Also the oil pan might be different. Sounding like lot of money an work Quote Link to comment Share on other sites More sharing options...
Kansas farmer Posted November 17, 2015 Share Posted November 17, 2015 Pm sent with phone number Quote Link to comment Share on other sites More sharing options...
880joe Posted November 17, 2015 Share Posted November 17, 2015 i have done this to a few trucks it"s not that bad of a job to do everything just moves forward 18 inches. You wont need to add battery box to rigt side the air tank moves forward front axle is the same the oil pan needs to be turned around oil pump changed to rear sump. The pieces that bumper bolt to at the frame and top part that shock bolts to are different you will also need the front mud flap hangers and pieces they atach to. If you have any questions you can call me at 417 880 4862 Joey Sherman Quote Link to comment Share on other sites More sharing options...
Keffer inc Posted November 19, 2015 Author Share Posted November 19, 2015 So I would need to buy another oil pump (or pickup tube?) and turn the pan around? How much money did you put into the axle swap? My truck likely isn't worth more than $15,000. Quote Link to comment Share on other sites More sharing options...
wilbur Posted November 19, 2015 Share Posted November 19, 2015 Im bettin between new hood an painting,bumper an all the things you dont see now about half of that Quote Link to comment Share on other sites More sharing options...
fullfuel01 Posted November 19, 2015 Share Posted November 19, 2015 880joecan you post a picture of your red CH? looks nice Quote Link to comment Share on other sites More sharing options...
880joe Posted November 19, 2015 Share Posted November 19, 2015 your oil pump and pan are the same just need turned around. I didn't spend a lot doing mine but I just shopped around till I found a sfa truck in salvage yard and got my parts cheep.I think it was about 2000 for parts new back in 2011not including hood and bumper. I think I still have parts list and numbers I could fax you Quote Link to comment Share on other sites More sharing options...
880joe Posted November 19, 2015 Share Posted November 19, 2015 Will try and get good picture of my truck and post it Quote Link to comment Share on other sites More sharing options...
Popular Post 880joe Posted November 22, 2015 Popular Post Share Posted November 22, 2015 Fullfuel01 here are a few pictures of my Mack 6 Quote Link to comment Share on other sites More sharing options...
Keffer inc Posted November 22, 2015 Author Share Posted November 22, 2015 Nice looking truck! Can you email the parts list to me? ankeffer17@aol.com Thanks. I think I want to do this, but I may get another truck first so I can keep running. How many hours do you think you had in swapping all the parts? Quote Link to comment Share on other sites More sharing options...
Keffer inc Posted November 22, 2015 Author Share Posted November 22, 2015 And I thought axle forward trucks used two battery boxes? optional? Quote Link to comment Share on other sites More sharing options...
Superdog Posted November 23, 2015 Share Posted November 23, 2015 And I thought axle forward trucks used two battery boxes? optional?just on the Rawhides.,and both we had the RH one was empty Quote Link to comment Share on other sites More sharing options...
Superdog Posted November 23, 2015 Share Posted November 23, 2015 Fullfuel01 here are a few pictures of my Mack 20151122_152318.jpg20151122_152200.jpg20151122_152242.jpg20151122_152220.jpglooks good,Joey. You still have my old '99? Quote Link to comment Share on other sites More sharing options...
880joe Posted November 23, 2015 Share Posted November 23, 2015 I will try and email you the parts list this week end. With a decent place to work and some good help I think you could do it in 3 days easy. And yes I do still have the 99 I got from you Mike Quote Link to comment Share on other sites More sharing options...
fullfuel01 Posted November 23, 2015 Share Posted November 23, 2015 nice wb. Quote Link to comment Share on other sites More sharing options...
staxx Posted November 27, 2015 Share Posted November 27, 2015 SF and SB Quote Link to comment Share on other sites More sharing options...
Bella69 Posted August 1, 2019 Share Posted August 1, 2019 what about a mack vision change to a set forward axle 1 Quote Link to comment Share on other sites More sharing options...
880joe Posted August 1, 2019 Share Posted August 1, 2019 Probably not impossible but would be alot more work to make it look correct 1 Quote Link to comment Share on other sites More sharing options...
Maxidyne Posted August 1, 2019 Share Posted August 1, 2019 Expensive nose job, and just as functional as a nose job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.