razorback11 Posted November 15, 2015 Share Posted November 15, 2015 Ladies and Gents,I was wondering if someone could tell me what the part number would be for a Cylinder Rebuild Kit for a Mack End 711. Somebody has a New/Old stock kit with piston, sleeve, etc. with a part # of 57GC358 NOS A5213....but I have no idea what engine that would fit. Although the pistons look like mine...chances are the kit is for a smaller bore. Any of you experts out there know what the part for a 711 would be? Thanks Quote Link to comment https://www.bigmacktrucks.com/topic/42671-cylinder-rebuild-kit-for-end-711part/ Share on other sites More sharing options...
alex g Posted November 15, 2015 Share Posted November 15, 2015 Call mack dealer give them part # if there helpful they will be able to tell youSent from my SM-G386W using Tapatalk Quote Link to comment https://www.bigmacktrucks.com/topic/42671-cylinder-rebuild-kit-for-end-711part/#findComment-311482 Share on other sites More sharing options...
Maddog13407 Posted November 15, 2015 Share Posted November 15, 2015 711 sleeves and pistons are rare as hens teeth. if it is NOS I would be willing to bet its not a 711. I have seen 711 sleeves and piston sets go at auction for $500 a hole.... Quote Link to comment https://www.bigmacktrucks.com/topic/42671-cylinder-rebuild-kit-for-end-711part/#findComment-311508 Share on other sites More sharing options...
j hancock Posted November 15, 2015 Share Posted November 15, 2015 Ask the seller to measure the piston. Don't tell them what size you are looking for. If they come back and say it is 5" then it is what you are looking for. 711 is a 5" bore and 673 is 4 7/8" 2 Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/42671-cylinder-rebuild-kit-for-end-711part/#findComment-311539 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.