heavy haul Posted December 5, 2015 Share Posted December 5, 2015 Ive got a fuel leak from from the fuel line at the injection pump rather than play around i am going to replace the line this is the steel line that goes from the injection pump to the fuel nozzle assy thru the side of the block is there anything speacial i should know or is this a straight forward remove and replace any and all comments or suggestions are welcome thanx in advance Quote Link to comment https://www.bigmacktrucks.com/topic/42960-1996-e7-427-fuel-nozzle-inlet-tube-assy/ Share on other sites More sharing options...
theakerstwo Posted December 5, 2015 Share Posted December 5, 2015 It goes in the side of the head to a injector.Get the torque specs and don't go over the specs. Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/42960-1996-e7-427-fuel-nozzle-inlet-tube-assy/#findComment-314295 Share on other sites More sharing options...
Challenger Posted December 5, 2015 Share Posted December 5, 2015 Straight forward, remove and replace. The older original lines could have 2 different size nuts at the engine head. One 13/16" and the other 3/4". If you planned on reusing the line you would want to loosen the 13/16 outer nut and then the 3/4" which is the one that threads into the head. Then reverse order for reinstalling. The newer lines will only have the 3/4" nut at the head. Quote Link to comment https://www.bigmacktrucks.com/topic/42960-1996-e7-427-fuel-nozzle-inlet-tube-assy/#findComment-314363 Share on other sites More sharing options...
KKERGALL Posted December 5, 2015 Share Posted December 5, 2015 Part number of line should be stamped in one end of nut. Four ( 4 ) digit number. Quote Link to comment https://www.bigmacktrucks.com/topic/42960-1996-e7-427-fuel-nozzle-inlet-tube-assy/#findComment-314365 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.