Jump to content

Recommended Posts

Can a 237 pump and injectors be adapted to a End707 motor?
It will bolt up and start but the calibrations are different. The 707 injector would have to have the # checked against the maxidyn engine and the 707 or same as 711 has a sncrovance in the pump drive to advavce the timing as much as 13 degrees at hi idle were the maxidlyn pump has a direct drive and has no advance and on top of that the 707 has smaller pumps and will not fuel as much and the maxidyn pumpThe maxidyn pump has a different governor for low end torque so the pump would be of no use to you. The 237 pump would destroy the 707 engine if you put it on. The 707 engine has no turbo and is not a low end torque engine and could not be used for that because of other things. glenn

glenn akers

A 237 pump on a 707 would probably make an awesome "smoke show"!

:D:D:D:D

Ya that is what i was trying to say. Alot of smoke if you could get it out of the pipes. Then it probley would spit a gasket out from under the heads. glenn

glenn akers

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...