57Mack Posted January 1, 2016 Share Posted January 1, 2016 Is there a way to manually bypass a hydraulic govenor to fire quickly? My engine cranks way too long until oil pressure builds, then fires. Any thoughts apreciated. Quote Link to comment https://www.bigmacktrucks.com/topic/43349-673-with-hydraulic-govenor/ Share on other sites More sharing options...
theakerstwo Posted January 1, 2016 Share Posted January 1, 2016 If you look at the rear of the pump if I remember right the rack extends out the back hich has a cover over it.Maybe a plug.If you find that you can thread a screw into the end of the rack and connect a pull wire to it.You will have to leave the cover off and now you will get dirt on the rack.I guess you could put robber boot over that as a dust cover.You would pull the wire back for a fast start or as some used it for more fuel when passing your buddy. Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/43349-673-with-hydraulic-govenor/#findComment-318231 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.