Daimler connects platooning to industry transformation

[kscarbel2]

Fleet Owner  /  March 21, 2016

Autobahn demonstration in traffic kicks off new focus on global connectivity services and solutions.

“The hottest ‘things’ going online now are trucks,” according to Wolfgang Bernhard, head of Daimler Truck & Bus. “Connected trucks … will transform transportation completely,” he said during a press briefing.

The highlight of the event was a public demonstration of the company’s latest connectivity technologies with a live truck platoon running down the A52 Autobahn in daytime traffic.  An extension of Daimler Truck’s Highway Pilot semi-autonomous driving system, Highway Pilot Connect allowed three tractor-trailers to couple into a platoon and switch control of the two following trucks to autonomous steering, accelerating and braking. 

The demonstration included have a car cut between the two semi-autonomous trucks, which reacted by lengthening the following distance from 15 meters to 50 meters until the car left that lane. At that point, the trucks adjusted following distances to 15 meters again without any input from the drivers.

While “autonomous driving is easy to explain,” Bernhard said, “Connectivity … is more complex.” It holds the promise of solving underutilized truck capacity, improving traffic congestion, improving logistics efficiency and making drivers’ lives better, he said. “Soon, these problems can be problems of the past.  We have the solution at hand – connectivity.

“This truck will always be driving, it will always be fully loaded, never be stuck in a traffic jam, it will never fail, and it will be piloted by a happy driver,” Bernhard said.

Daimler Truck has received German government permission to continue testing its truck platooning technology on an autobahn corridor between Lake Constance and Würzburg. Company officials also referred to similar testing in the U.S. in the near future, but refused to provide further details.

“Connectivity is being fully embraced by our company,” the Daimler Truck head said. “We have understood its potential and we are determined to realize it. Everything is set to launch those ideas into the market.”

As part of that embrace, Bernhard announced the formation of a separate division to focus on digital solutions and services for the entire truck group.  It will be staffed with 200 employees and will coordinate efforts with Detroit Connect in North America.

 

Daimler Trucks Press Release - http://media.daimler.com/dcmedia/0-921-614341-1-1892815-1-0-0-0-0-1-0-1549054-0-1-0-0-0-0-0.html?TS=1458635949446

 

 

[kscarbel2]

Daimler Blueprints the Connected Truck

Heavy Duty Trucking  /  March 21, 2016

“If you asked me to blueprint the connected truck,” said Wolfgang Bernhard, head of Daimler Trucks and Buses, “I’d say ‘this truck will always be driving, it will always be fully loaded, never be stuck in a traffic jam, it will never fail, and it will be piloted by a happy driver.”

He added that with such a truck, there would be no paperwork, accidents or breakdowns – before admitting he is “well aware that we might never completely get there. But it’s the direction we’re taking. At full speed. And with a hot heart.”

The occasion was Monday's "Campus Connectivity" event, where the German truck maker unveiled what it says is the first semi-autonomous truck platooning system, Highway Pilot Connect.

Bernhard also conceded that connectivity is a fuzzy term. “Autonomous driving is easy to explain,” he said to a large audience that included journalists drawn from 36 countries.

“The driver takes his hands off the wheel, his feet off the pedals — and that’s it. Connectivity is not so easy to explain.”

Indeed, a definition of connectivity offered by Daimler describes it as much more than integrating truck-generated data: “Connectivity is when everyone communicates with everyone and everything else, to the benefit of all parties involved… [it’s] when all those participating in this tight-knit communication network receive the correct information at the right time and in the right place.”

In this case, it’s all about connecting trucks to the Internet of Things (IoT). That’s techie shorthand for the vast and growing network of electronic devices that gather and exchange data.

For truck makers, connectivity is not just a buzzword.

Daimler, for one, sees connectivity as the means to leverage the data generated and shared by trucks to radically transform transportation logistics. Its reason for doing so is lofty as well: to benefit everyone from truckers to shippers to motorists and everything from the economy to the environment.

Pointing to ever-increasing freight volumes on the one hand and road networks that “will not triple,” Bernhard said the challenge ahead for logistics is huge.

On the other hand, he argued that “logistics takes place in a big network with the truck in its center… So far, the connections of this network are sketchy; sometimes they barely exist. [That’s] because the flow of information — of real-time information — is weak. The consequence is a waste of resources.”

By contrast, he said that now “a revolution” is taking place. “We have a vision of the future where the entire transportation process is completely seamless. Where the flow of goods on the road is mirrored by a flow of information from the Internet in real time. Where the connected truck is the main data node at the center of the logistics network.”

That’s the big picture. Bernhard predicted that over time, “connectivity will create a whole new universe of applications,” which will improve everything from fuel efficiency to load and route planning, loading/unloading times, empty miles, traffic congestion, border/customs clearance, insurance rates, and driver productivity and job satisfaction.

Daimler pointed out that connectivity will involve advancing both vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications. The autonomous or “self-driving” truck is also part of the OEM’s picture, as it requires full-scale connectivity in the form of V2V communications to function.

The company started down the connectivity road 30 years ago when its Prometheus research project “laid the foundations for today's fully networked vehicle.” More recently, Daimler showcased its Highway Pilot autonomous vehicle technology in two trucks, the Mercedes Benz Actros cabover, for European and other markets, and its North American counterpart, the Freightliner Inspiration Truck.

The Freightliner Inspiration, based on the Cascadia production model, was the first autonomous truck to gain approval to operate on public roads, in 2015, thanks to the State of Nevada.

Shortly after, a standard Mercedes-Benz Actros equipped with Highway Pilot was approved to run on German public roads as a test vehicle. It’s permitted to drive on all Autobahns in semi-automated mode. That means that while the vehicle drives autonomously, the driver must constantly monitor the system and be able to take control at any time.

At its international media event in Dusseldorf on March 21, Daimler showed off its next advance in autonomous vehicles, the Highway Pilot Connect system, 

It enables several autonomously driving trucks — including the lead unit — to temporarily platoon as desired. A vehicle can pull out of the platoon at any time and equipped trucks can join the platoon at any time.

Daimler called the Highway Pilot Connect extension “a further step in the rapid progress towards the transport system of tomorrow.”

[kscarbel2]

Lane Change

 

 

[kscarbel2]

Emergency Braking

 

 

 

[kscarbel2]

Platooning

 

 

 

 

[kscarbel2]

Cut in Vehicle