injector line

[carlotpilot]

need a #4 injector line for an e6 350 with robert bosch pump

[kscarbel2]

If it's the original engine in the truck, contact Watt's Mack with your model and serial number off the vehicle identification plate on the driver's door.

[carlotpilot]

not original eng but thanks

[alex g]

I've had problems with getting correct line before. I have original motor in truck but the line I got from Mack was slightly different. I think if you remove line you should have a part # on where it attaches to pump or fuel delivery nozzle. Hopefully this helps. I have a few miscellaneous lines here if you can't find anything.

Sent from my SM-G386W using Tapatalk

[KKERGALL]

on one of the nuts there should be number stamped into it. I.E. 3237 ? 

[carlotpilot]

we referenced the part #and got a wrong one first` supposedly the right one is on the way we will find out tomorrow,  thanks for looking still might need one

[kscarbel2]

On ‎4‎/‎30‎/‎2016 at 3:55 AM, kscarbel2 said:

If it's the original engine in the truck, contact Watt's Mack with your model and serial number off the vehicle identification plate on the driver's door.

If it's a Mack fuel line, the 203GC Mack fuel line part number is stamped into the side of one of the two mounting nuts.