kevin l y Posted June 13, 2016 Share Posted June 13, 2016 I'm a model builder and want to convert an r600 kit into a valueliner.I know that a value liner is taller so I cut the kit hood apart and tried to add a strip to increase the height.thats where things got ugly with nothing lining up .My questions are, is the hood wider at the upper front or is the fender narrower at the front to compensate for the added height?what I really need is some measurements of the upper area above the grill or fender width or a side by side comparison from the front.Also Ive noticed some have a raised section in the center of the hood ,some don't. Quote Link to comment https://www.bigmacktrucks.com/topic/45650-value-liner-hood/ Share on other sites More sharing options...
j hancock Posted June 14, 2016 Share Posted June 14, 2016 Sorry, I don't have a Valueliner hood to measure. Here is some previous discussion and pictures that may help in your model building. http://www.bigmacktrucks.com/topic/44376-valueliner-just-curious-is-all/#comment-327788 Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/45650-value-liner-hood/#findComment-336525 Share on other sites More sharing options...
Lmackattack Posted June 14, 2016 Share Posted June 14, 2016 search for "wiskymack" on this forum. He has painstakingly made 1/25 models of a few Mack Western R models. I think he offers these kits for sale. I have one of his RS700L kits and its amazing the detail he did on it. He also had a thread on here of a Valueliner he built. this was a year or 2 ago? 1 Quote Link to comment https://www.bigmacktrucks.com/topic/45650-value-liner-hood/#findComment-336535 Share on other sites More sharing options...
Lmackattack Posted June 14, 2016 Share Posted June 14, 2016 Quote Link to comment https://www.bigmacktrucks.com/topic/45650-value-liner-hood/#findComment-336539 Share on other sites More sharing options...
41chevy Posted June 14, 2016 Share Posted June 14, 2016 10 minutes ago, Lmackattack said: Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment https://www.bigmacktrucks.com/topic/45650-value-liner-hood/#findComment-336544 Share on other sites More sharing options...
Whiskymack Posted June 14, 2016 Share Posted June 14, 2016 I made a Value Liner from the AMT kit and can supply you with a hood if you don't fancy making your own one. The one I did is vacuum formed but it doesn't have the ridge on the top which came in about 1978 or thereabouts. I added the ridge to the hood later. I did a lot of other bits and pieces too including Western style fuel and air tanks, battery boxes and badging so if you are interested in any of it send me a PM. It's a lot of work because the frame is different too. The Western R's all had deeper section, straight rail frames unlike the tapered and flared Eastern R model frame. You basically need to scratch build a new frame if you want to be faithful to the real thing. 2 Quote Link to comment https://www.bigmacktrucks.com/topic/45650-value-liner-hood/#findComment-336606 Share on other sites More sharing options...
Vladislav Posted June 14, 2016 Share Posted June 14, 2016 A modelbuilder overhere made Rubber Duck truck some years ago. He built it in 1:24 using Italery cab. You can see the pictures here http://www.autoinscale.com/?section=article&id=321 I doubt he had any real hood measurments avalible and as I can see now the frame's front is wrong (he made it of an Eastern R-model style). Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/45650-value-liner-hood/#findComment-336614 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.