Jump to content

Recommended Posts

My RS has a five speed and that is great for its intended use but I use it for a parade truck and need something with a double reduction . I have to use the clutch way to much during parades and I notice the nine speed in my truck at work has a double reduction and that would be perfect. I was offered a six speed but know nothing about them and don't know if it would be any better than what I have now.

Link to comment
https://www.bigmacktrucks.com/topic/46045-looking-for-a-different-transmission/
Share on other sites

If the offered 6 speed is a T2060 then it has an air shifted hole gear.  The ratio is 9.02:1 which is much deeper than your 5-speed with a 5.24:1.  To install you will need to cut down a drive shaft because the transmission is about 8 inches longer and you will need a shift knob with toggle switch. 

If the 6 speed is a T306G, it will have a 1st gear ratio of 7.5:1.  It would fit the same as your 5-speed and should be a simple swap out.

T306G.png

T2060.png

TRXL107 6 speed has a low first gear ratio of 14.10 and the high side is the same as your existing 5 speed. TRX107A is air shift version.

TRXL1071 has a super low 23.08 ratio. TRXL1071A air shift.

Jim

It doesn't cost anything to pay attention.

Looks like I'm going to buy the transmission from this guy he wants 300 for it came out of a 75 R model he says its in good useable condition I'm going to pick it up next week is 300 dollars a good price for a six speed? I still dot know what model trans it is he says I may still have to shorten the drive shaft due to the longer cone on the back for the output shaft.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...