polracer01 Posted August 2, 2016 Share Posted August 2, 2016 I have the opportunity to purchase a 93 superliner with an e7 350 mechanical motor. I have been hoping for an e7 400 but the price is right with this truck. So I guess my question is would I notice a big difference in power between the 2 motors. Truck will be used to haul dump trailer pulling 25 to 30 tons this e7 350 has an 8ll. Any input would be greatly appreciated Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/ Share on other sites More sharing options...
Underdog Posted August 2, 2016 Share Posted August 2, 2016 Lots of work gets done with that combo... Think about what that particular truck has been already doing for the last 23 years. I wouldn't hesitate a bit. Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341109 Share on other sites More sharing options...
polracer01 Posted August 2, 2016 Author Share Posted August 2, 2016 Thanks for the reply underdog yeah it is a good combo just wondering if there is a big difference between the 350 hp and the 400hp Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341110 Share on other sites More sharing options...
mowerman Posted August 2, 2016 Share Posted August 2, 2016 Ya I used to run one great engine lotta power I'm sure the 400 would be a little better but good luck bob Sent from my XT1096 using Tapatalk Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341111 Share on other sites More sharing options...
polracer01 Posted August 2, 2016 Author Share Posted August 2, 2016 Thanks for the reply Bob did you have an 8ll also all my other trucks are e6 300 with 6 speeds not to familiar with an 8ll some iam sure it will be a big difference to me Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341114 Share on other sites More sharing options...
keg1 Posted August 3, 2016 Share Posted August 3, 2016 I had an 89 R model with E 6 350 and 9 speed pulled dump and it did real good. Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341154 Share on other sites More sharing options...
mackey58 Posted August 3, 2016 Share Posted August 3, 2016 I think it will work out find look what underdog said .proven over the years and millions of miles.what's it have for rears4.17 Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341156 Share on other sites More sharing options...
mowerman Posted August 3, 2016 Share Posted August 3, 2016 Don't remember the cubes sorry was 20 years ago but used to pull loaded doubles up the grapevine kept went rite up with heavy loads not a problem nice healthy engine bob Sent from my XT1096 using Tapatalk Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341160 Share on other sites More sharing options...
mowerman Posted August 3, 2016 Share Posted August 3, 2016 If it will help you doing the same job with a 400 Cummings seems to pull the same way bob Sent from my XT1096 using Tapatalk Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341162 Share on other sites More sharing options...
mowerman Posted August 3, 2016 Share Posted August 3, 2016 Excuse me I meant to say a 460 Cummings seems to pull it same speed as the 350 thermodynamics did bob Sent from my XT1096 using Tapatalk Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341163 Share on other sites More sharing options...
polracer01 Posted August 3, 2016 Author Share Posted August 3, 2016 Not sure about rear end ratio hadn't gotten that far on it yet..this truck is more of a want then a need and have been holding out for a really good e7 400 this truck kind of sprung up on me wouldn't of really considered it except for the fact that is the final year for the superliner... so was hoping some of you guys had run one or both I know the power of an e6 300 and an e6 350 does the e7 run circles around the e6? Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341165 Share on other sites More sharing options...
1965 Posted August 3, 2016 Share Posted August 3, 2016 32 minutes ago, polracer01 said: Not sure about rear end ratio hadn't gotten that far on it yet..this truck is more of a want then a need and have been holding out for a really good e7 400 this truck kind of sprung up on me wouldn't of really considered it except for the fact that is the final year for the superliner... so was hoping some of you guys had run one or both I know the power of an e6 300 and an e6 350 does the e7 run circles around the e6? Never driven a e7 400 but have driven bunch of the 300,350 Macks & all other brand up to 550hp; NO circles Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341173 Share on other sites More sharing options...
polracer01 Posted August 3, 2016 Author Share Posted August 3, 2016 1965 do you have any comparison between an e6 compared to the e7 I own 4 trucks with e6 motors but never tried an e7 Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341175 Share on other sites More sharing options...
1965 Posted August 3, 2016 Share Posted August 3, 2016 1 minute ago, polracer01 said: 1965 do you have any comparison between an e6 compared to the e7 I own 4 trucks with e6 motors but never tried an e7 No sir just was saying not going to be HUGE difference; that's just my opion Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341176 Share on other sites More sharing options...
polracer01 Posted August 3, 2016 Author Share Posted August 3, 2016 Okay thanks 1965 I appreciate your info Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341178 Share on other sites More sharing options...
joes mack Posted August 4, 2016 Share Posted August 4, 2016 I have driven both the e7 350s and 400s and in a hard pull the 400s would pull the same weight a lot easier in the same gear but not enough to go to the next gear with a 8 speed. but then again we normally hauled between 38 to 42 tons of coal on the mountain haul roads which were a lot steeper than most of the highways in the whole country. Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341271 Share on other sites More sharing options...
polracer01 Posted August 4, 2016 Author Share Posted August 4, 2016 (edited) Thanks joe appreciate the info good to hear from everyone with there life experiances. Decided to pass on this truck and stick to looking for one with an e7 400 been looking for a long time so might as well wait a little longer. Course when you are looking for a one of one ever made may take awhile lol. Dream truck e7 400 15sp 20k and 44k dual stack all original maybe it is just a dream lol Edited August 4, 2016 by polracer01 Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341309 Share on other sites More sharing options...
Back In Black Pulling Posted August 4, 2016 Share Posted August 4, 2016 If it an e7 350 couldn't you make it a 400? What all do you need to do? Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341347 Share on other sites More sharing options...
polracer01 Posted August 5, 2016 Author Share Posted August 5, 2016 From what I have read differantly pump and differantly pistons... right or wrong that's what I have found 1 Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341355 Share on other sites More sharing options...
ekennedy21 Posted August 5, 2016 Share Posted August 5, 2016 Same pump, different injectors and turbo I believe. The pump just gets adjusted. I believe the e7 mechanical can go all the way to 454. Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341389 Share on other sites More sharing options...
ekennedy21 Posted August 5, 2016 Share Posted August 5, 2016 Also most of the e7 superline rd were 12 speed. The 15 speed was popular with the e9 Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341390 Share on other sites More sharing options...
mackey58 Posted August 5, 2016 Share Posted August 5, 2016 There s one in the truck paper e7400 15 speed Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341394 Share on other sites More sharing options...
mackey58 Posted August 5, 2016 Share Posted August 5, 2016 Sorry it's an 18 speed 91 4 axle in utah Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341395 Share on other sites More sharing options...
polracer01 Posted August 6, 2016 Author Share Posted August 6, 2016 Yeah there is a tri axle but looks a beat for the price Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341464 Share on other sites More sharing options...
mackey58 Posted August 6, 2016 Share Posted August 6, 2016 Yea it does.l think you got your work cut out for you to find the right but hang in there Quote Link to comment https://www.bigmacktrucks.com/topic/46292-need-some-opinions/#findComment-341466 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.