kscarbel2 Posted September 14, 2016 Share Posted September 14, 2016 Scania Group / September 13, 2016 Safety has always been a part of Scania’s DNA. The new generation of trucks has undergone five years of advanced crash testing, with technologies and equipment never before used for heavy vehicles. A total of some 40 trucks had to give up their lives during the development phase of the new truck generation. Every single crash test is planned for over a year, takes six to eight weeks to prepare for – and is over in half a second. To prepare for these brief but important moments, a large number of sensors and other test equipment is rigged in and around the test vehicle and crash test dummy. Because the crash process goes so incredibly fast, dozens of high-speed cameras are used so that the crash can be studied in detail. “We test the truck’s crash safety in a number of different ways,” says Dan Loftén, who is responsible for all crash tests on Scania’s new trucks. “We drive it into different obstacles: poles, passenger cars, concrete railings and a variety of different barriers. The most advanced and risky crash tests are conducted outdoors with loaded semi trailers driven by a robot. We use this method to conduct things like rollover accidents.” One of all these tests, with the working title ’trailer back’, aims to calibrate the sensor that deploys the truck’s airbags. At a crash facility at Helmond in the Netherlands, Scania’s crash test team is preparing for a collision where one corner of the new truck will be driven straight into a trailer in front of it. “Driving into a trailer in front of you is one of the most serious accidents that you can encounter as a truck driver,” says Loftén. “With the new generation of trucks, we have made a major investment in improving safety in these types of accidents.” Sofia Sandin, the engineer leading one of the crash tests, explains, “For the best results, we work with scenarios that are as much like real-life as possible and with data that’s of an extremely high quality.” Sandin ensures that all the sensors and measuring equipment in and around the truck are working properly ahead of the controlled crash. The data from the test will be used in the calibration of the truck’s safety system. Alongside her in the building is the result of yesterday’s test – a new truck that’s now ready for the scrapyard. 1. The truck and a passenger car are prepared for the crash test. 2. Time for the actual test. In a fraction of a second it’s over. 3. After the test bits and pieces are collected for the analyses of the test. . Quote Link to comment https://www.bigmacktrucks.com/topic/46835-high-tech-crash-testing/ Share on other sites More sharing options...
BC Mack Posted September 14, 2016 Share Posted September 14, 2016 That's the expensive way to do it.... All they need to do is look up "Russian Truck crash" videos on youtube and all their research data will be there... Pick the manufacturer of the truck you may wish to purchase and watch how it survives a head-on, or not. No offense Vlad, but your countrymen do tend to have a higher accident rate than most.... LOL BC Mack Quote Link to comment https://www.bigmacktrucks.com/topic/46835-high-tech-crash-testing/#findComment-345629 Share on other sites More sharing options...
kscarbel2 Posted September 14, 2016 Author Share Posted September 14, 2016 Seriously though, there is no safer truck, for all concerned, than a Scania. Quote Link to comment https://www.bigmacktrucks.com/topic/46835-high-tech-crash-testing/#findComment-345638 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.