Elitedownunder Posted February 3, 2017 Share Posted February 3, 2017 Hi, my old 1994 CLR Elite 454VMAC1 and 18 sp T2180.....driving a few hundred kms yesterday I noticed that when shifting from low to high with the selector it then coasts in neutral, I can hear the shift working but nothing. It is fine moving around in 1st to 4th it is only when I move the selector to high. I did replace the rubber boot before heading out on this trip and took the lever out and cut the lines before putting it back together ( I now know how to push the end connectors up and pull to remove) any ideas other then this. Quote Link to comment https://www.bigmacktrucks.com/topic/48607-t2180-troubles/ Share on other sites More sharing options...
Back In Black Pulling Posted February 4, 2017 Share Posted February 4, 2017 Did you get the air lines switched or pinched ? Quote Link to comment https://www.bigmacktrucks.com/topic/48607-t2180-troubles/#findComment-360670 Share on other sites More sharing options...
Elitedownunder Posted February 5, 2017 Author Share Posted February 5, 2017 I don't know but will have a look tomorrow. Quote Link to comment https://www.bigmacktrucks.com/topic/48607-t2180-troubles/#findComment-360793 Share on other sites More sharing options...
Elitedownunder Posted February 9, 2017 Author Share Posted February 9, 2017 No all looks good in this dept and no air leaks. any other thoughts people? Quote Link to comment https://www.bigmacktrucks.com/topic/48607-t2180-troubles/#findComment-361177 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.