Buck25 Posted September 22, 2017 Share Posted September 22, 2017 Hello, I have a 1990 EM6-300 with a bad ambac pump. I was wondering if a P7100 from an E7-350 would bolt onto an E6? I have the complete E7 engine (has spun bearing). Quote Link to comment https://www.bigmacktrucks.com/topic/51079-em6-p7100-swap-from-e7/ Share on other sites More sharing options...
Mack Technician Posted September 22, 2017 Share Posted September 22, 2017 No. Quote Link to comment https://www.bigmacktrucks.com/topic/51079-em6-p7100-swap-from-e7/#findComment-380359 Share on other sites More sharing options...
theakerstwo Posted September 22, 2017 Share Posted September 22, 2017 (edited) delect Edited September 22, 2017 by theakerstwo mistake Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/51079-em6-p7100-swap-from-e7/#findComment-380388 Share on other sites More sharing options...
fjh Posted September 22, 2017 Share Posted September 22, 2017 11 hours ago, Mack Technician said: No. Agree! The Short list! Fuel lines are metric. the drive hub likely won,t fit the mount May or may not be drilled for rob bosch! There are likly lots more oddities! Quote Link to comment https://www.bigmacktrucks.com/topic/51079-em6-p7100-swap-from-e7/#findComment-380398 Share on other sites More sharing options...
theakerstwo Posted September 22, 2017 Share Posted September 22, 2017 I did not read the question like i should have.I see he is talking about a ambac. and on a 90 year E6 it may not be drill for the four mounting bolts. I have a E6 350 ambac pump and injectors i will sell for 1000.00 and it has about 200000 mile since reman from mack. Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/51079-em6-p7100-swap-from-e7/#findComment-380418 Share on other sites More sharing options...
fullfuel01 Posted September 23, 2017 Share Posted September 23, 2017 i think it fit. I know there is different 'adapter' between the pump and block but a friend of mine made it. Quote Link to comment https://www.bigmacktrucks.com/topic/51079-em6-p7100-swap-from-e7/#findComment-380459 Share on other sites More sharing options...
Buck25 Posted September 24, 2017 Author Share Posted September 24, 2017 Ok. Thanks for all the replys guys! Quote Link to comment https://www.bigmacktrucks.com/topic/51079-em6-p7100-swap-from-e7/#findComment-380492 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.