nelson76 Posted November 13, 2017 Share Posted November 13, 2017 A mack granite 05 lose vss signal from vecu after 25 mph and allredy check the vss and wiring everything ok is like not comunication exist betwin vecu and others ecm Quote Link to comment https://www.bigmacktrucks.com/topic/51658-mack-granite-05-lose-vss-signal-from-vecu-at-40-mph/ Share on other sites More sharing options...
turckster Posted November 18, 2017 Share Posted November 18, 2017 The sensor should have 100-200 ohms (usually 160 ohms)--measurement from the vecu connector. The sensor adjustment is 1 turn out after contact to the tone ring. If all of that is correct make sure the tone ring is tight on the yoke. When making the resistance check of the speedo sensor, wiggle the wiring to see if the value changes. Quote Link to comment https://www.bigmacktrucks.com/topic/51658-mack-granite-05-lose-vss-signal-from-vecu-at-40-mph/#findComment-385235 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.