Jump to content

Recommended Posts

I unplugged the drop light I put under the house yesterday morning because I thought I would be leaving. Now the water's frozen again, so I plugged it back in. I'm waiting for it to thaw so I can take a shower before I leave for Pittsburgh. Looks like it won't be getting above freezing around here until Monday.

DSCN3044.JPG.13fed543e5a0c58dd4c66ab11e662514.JPG

 

Producer of poorly photo-chopped pictures since 1999.

Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-388891
Share on other sites

14 hours ago, ranchhopper said:

This is one of the best videos for the whine the two stroke roots blown V16 567 makes while being notched up watch how this guy bounces around like being in a truck. Nice old original barrel style control stand which are all gone now I'm just glad we still had a lot of the older units in service you never forget the sound of these this was a single engine unit the E9s had two of these in each unit..

Ok after watching the video how close are  2 trains when passing each other?  Seams pretty damn close.   Gotta make your ass grab the seat the first few times.  

Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-388896
Share on other sites

12 minutes ago, other dog said:

I unplugged the drop light I put under the house yesterday morning because I thought I would be leaving. Now the water's frozen again, so I plugged it back in. I'm waiting for it to thaw so I can take a shower before I leave for Pittsburgh. Looks like it won't be getting above freezing around here until Monday.

DSCN3044.JPG.13fed543e5a0c58dd4c66ab11e662514.JPG

 

this morning on 11/15 north of Harrisburg  I had -8.    Better stay south of the Mason Dixon 

Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-388897
Share on other sites

2 minutes ago, Hobert62 said:

Ok after watching the video how close are  2 trains when passing each other?  Seams pretty damn close.   Gotta make your ass grab the seat the first few times.  

That was the hard part for me when I first sat on the conductors side of the locomotive while riding with a family member who was an engineer back in the 60s. Didn't take long to get used to though some of the lines in southern Wisconsin got bretty rough though.

Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-388898
Share on other sites

when that old E unit walks right past the brand new diesels at 60 mph then bumps the throttle up 4 more notches. you can hear those twin EMD diesels start to sing in notch 8.   

 

this was filmed in 1994

 

 

 

 

 

 

 

  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-388899
Share on other sites

2 hours ago, Lmackattack said:

when that old E unit walks right past the brand new diesels at 60 mph then bumps the throttle up 4 more notches. you can hear those twin EMD diesels start to sing in notch 8.   

 

this was filmed in 1994

 

 

 

 

 

 

 

I have had many a ride up front in old 9911A  its hard to believe that unit was built I believe in 1940 and still runs out the way it does they had her up to 80 MPH on that trip. That freight train was sided up to let the zephyr pass as it was on the main but its a real shame they didn't save that locomotives cab less B unit before it got scrapped.

Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-388913
Share on other sites

3 hours ago, other dog said:

I unplugged the drop light I put under the house yesterday morning because I thought I would be leaving. Now the water's frozen again, so I plugged it back in. I'm waiting for it to thaw so I can take a shower before I leave for Pittsburgh. Looks like it won't be getting above freezing around here until Monday.

DSCN3044.JPG.13fed543e5a0c58dd4c66ab11e662514.JPG

 

The things some of us take for granted,reminds me to check what is wrong with my air conditioner .

Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-388916
Share on other sites

do you have a gelled up tank...??

solution... find some rags and drop on the ground, shower with diesel, set it alight, find a stick and drag pile of burning rags under your diesel tank... simple..!!... note, doesn't work too well with aluminum tanks. :rolleyes:

BC Mack

zz fuel.jpg

  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-388918
Share on other sites

I'm loving it. When it hit -25 my car saw a considerable horsepower increase. Nice, dense, cold, oxygen-rich air feeding the pistons........Combined with a frozen starter that stays engaged while the engines running to give me Nitro-power in the low RPM range. Sorta like a Prius, only tragic.    

Edited by Mack Technician
  • Like 1
  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-388922
Share on other sites

OD,I talked my sister in Pittsburgh last, night was -1 Thursday so you musta froze your keister when you got there! Couple days ago our pipes at the well froze a little bit in Florida! Quickly melted when the sun came out! Coldest I've ever been was around 1990 loading conversion vans in Bristol Indiana,chains not straps! Was -25 in Chicago 100 miles away! Got minor frostbite on my hands! Couldn't count the "gelled up" trucks I saw on my way to Florida! What were they thinking!? Never heard of additive?

Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-389131
Share on other sites

18 hours ago, BillyT said:

OD,I talked my sister in Pittsburgh last, night was -1 Thursday so you musta froze your keister when you got there! Couple days ago our pipes at the well froze a little bit in Florida! Quickly melted when the sun came out! Coldest I've ever been was around 1990 loading conversion vans in Bristol Indiana,chains not straps! Was -25 in Chicago 100 miles away! Got minor frostbite on my hands! Couldn't count the "gelled up" trucks I saw on my way to Florida! What were they thinking!? Never heard of additive?

Coldest temps. i've ever been in was -26 in Ohio in the 80's. I had to load at Armco in Middletown on a Sunday night. Parked right under the big heating duct when I got in to load, I was the only truck in there. And like you saw, from there back to Lynchburg there were trucks on the shoulder all along  the way, with gelled fuel. I was the only truck that H.H.Moore had that was still running.  I had enough fuel treatment in the tanks to treat like 4,000 gallons of fuel- seriously, almost as much conditioner as fuel. 

Then when I got home I found every pipe under the house was frozen. The kids had opened the door going into the crawl space, playing, and left it open. All the pipes were copper too, and they split where it froze. I'd cut out a bad spot, solder in a new piece of tubing, turn the water on, and there would be another leak somewhere else.

Still chilly here, supposed to warm up tomorrow though.

DSCN3092.JPG.65b8129902d9efacb93c86198d23c54c.JPG

 

Producer of poorly photo-chopped pictures since 1999.

Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-389199
Share on other sites

4 hours ago, other dog said:

 I had enough fuel treatment in the tanks to treat like 4,000 gallons of fuel- seriously, almost as much conditioner as fuel.

DSCN3092.JPG.65b8129902d9efacb93c86198d23c54c.JPG

That's the problem people are having, not enough treatment.    Power service and howes both have on the bottle that you need to double the recommended amount for bio-diesel blends.   

Link to comment
https://www.bigmacktrucks.com/topic/52110-its-cold-here/page/2/#findComment-389215
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...