Paul prinzo Posted February 4, 2018 Share Posted February 4, 2018 What’s involved in replacing the whole vent window assembly? Does the frame and glass get installed as one unit or does the frame go in and then the glass? I see Mack sells them as a complete unit. Quote Link to comment https://www.bigmacktrucks.com/topic/52409-vent-window-r-modeldm/ Share on other sites More sharing options...
j hancock Posted February 5, 2018 Share Posted February 5, 2018 The vent window stays together as an assembly. To replace the vent window, the door lock cylinder needs to be removed and the three screws holding the lock to the door frame, then the inner door panel comes out and the window surround trim. Remove the screws holding the outer window weatherstrip. Remove the screws holding the vent window assembly. Slide the vent window backwards for clearance and remove. Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/52409-vent-window-r-modeldm/#findComment-391276 Share on other sites More sharing options...
Vladislav Posted February 5, 2018 Share Posted February 5, 2018 You can take the turning part of the went window out but only when all the assembly is removed from the door. You also can pull the glass off its frame if you really want. i had to combine parts making a good one of 2 or 3. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/52409-vent-window-r-modeldm/#findComment-391299 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.