Popular Post Adam smith Posted March 15, 2018 Popular Post Share Posted March 15, 2018 Just bought this 57 H63T, was hoping someone could help me find some Info on the truck and what the T means on the model numbers. Any help would be appreciated Sent from my SAMSUNG-SM-G890A using Tapatalk 4 Quote Link to comment Share on other sites More sharing options...
HarryS Posted March 15, 2018 Share Posted March 15, 2018 Welcome. That is a neat truck and worthy of the save. Keep us posted. I think the T stands for tractor, if not others will correct me. 1 Quote Link to comment Share on other sites More sharing options...
carlotpilot Posted March 15, 2018 Share Posted March 15, 2018 we expect to see that one up and running by the end of april 1 1 Quote Link to comment Share on other sites More sharing options...
CF600 Posted March 15, 2018 Share Posted March 15, 2018 T designates a single axle 1 Quote Link to comment Share on other sites More sharing options...
Adam smith Posted March 15, 2018 Author Share Posted March 15, 2018 Thank you all for your input, are these trucks hard to find parts for I have not been able to find much on the internet about them. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote Link to comment Share on other sites More sharing options...
steve s. Posted March 15, 2018 Share Posted March 15, 2018 Parts are out there, but you will have to figure out what will work on your truck. You are not likely to find anything being sold as a part "for H model Mack" .The H model cab is based on the L model sleeper cab. Some L model parts will fit , including the doors. The drivetrain shares many of its parts with B and other models. The engine and transmission are basically the same as a B model for instance, but the mounts, fan, radiator, shifters and other pieces are different for the H. If your cab and frame are good and you want to put the truck back together, your best bet might be to find another H model for parts. Most H model parts are interchangeable between the 63 and 67. Good luck, and keep us posted. 1 Quote Link to comment Share on other sites More sharing options...
Adam smith Posted March 15, 2018 Author Share Posted March 15, 2018 Parts are out there, but you will have to figure out what will work on your truck. You are not likely to find anything being sold as a part "for H model Mack" .The H model cab is based on the L model sleeper cab. Some L model parts will fit , including the doors. The drivetrain shares many of its parts with B and other models. The engine and transmission are basically the same as a B model for instance, but the mounts, fan, radiator, shifters and other pieces are different for the H. If your cab and frame are good and you want to put the truck back together, your best bet might be to find another H model for parts. Most H model parts are interchangeable between the 63 and 67. Good luck, and keep us posted.Thank you very much, looking for a grill mainly right now. Have a few more projects to finish up before I get started, but very anxious.Sent from my SAMSUNG-SM-G890A using Tapatalk Quote Link to comment Share on other sites More sharing options...
HeavyGunner Posted March 15, 2018 Share Posted March 15, 2018 Nice truck. I love those H models. Keep us updated on your progress. 1 Quote The problems we face today exist because the people who work for a living are outnumbered by the people who vote for a living.The government can only "give" someone what they first take from another. Link to comment Share on other sites More sharing options...
j hancock Posted March 15, 2018 Share Posted March 15, 2018 Looks like a project! As indicated T is for single axle tractor. 1 Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
eddeere Posted March 15, 2018 Share Posted March 15, 2018 Nice find . I have been looking for for a H model but no luck yet . Quote Link to comment Share on other sites More sharing options...
terry Posted March 15, 2018 Share Posted March 15, 2018 Good luck you have a real PROJECT there!! terry Quote Link to comment Share on other sites More sharing options...
yarnall Posted March 16, 2018 Share Posted March 16, 2018 Neat save. What Steve S above neglected to say is that he has an H63. I'm sure he will be a great reference for you if you keep posting on here. Where are you located and are you a member of ATCA? Mike Quote Link to comment Share on other sites More sharing options...
Adam smith Posted March 17, 2018 Author Share Posted March 17, 2018 Neat save. What Steve S above neglected to say is that he has an H63. I'm sure he will be a great reference for you if you keep posting on here. Where are you located and are you a member of ATCA? MikeI am in southeast Missouri about 100 miles south of st Louis and no I am not a member of ATCA. What is it? ThanksSent from my SAMSUNG-SM-G890A using Tapatalk Quote Link to comment Share on other sites More sharing options...
terry Posted March 17, 2018 Share Posted March 17, 2018 25 minutes ago, Adam smith said: I am in southeast Missouri about 100 miles south of st Louis and no I am not a member of ATCA. What is it? Thanks Sent from my SAMSUNG-SM-G890A using Tapatalk Antique Truck Club of America 1 Quote Link to comment Share on other sites More sharing options...
Vladislav Posted March 31, 2018 Share Posted March 31, 2018 The truck looks like it has potential. The 1st thing which comes to the mind is you have some ambitions to bring it to life. But I hope many parts were included with it, right? And as other mentioned above you could fill up the empty spots using old iron from different model Macks of the ages. Good luck on the project. Vlad Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
Adam smith Posted March 31, 2018 Author Share Posted March 31, 2018 The truck looks like it has potential. The 1st thing which comes to the mind is you have some ambitions to bring it to life. But I hope many parts were included with it, right? And as other mentioned above you could fill up the empty spots using old iron from different model Macks of the ages. Good luck on the project. VladThanks, I am doing what most mack purist will cringe at. I have a 1977 American la France firetruck that I plan to put this mack body on. I will keep the original frame steer and drive axle from the mack. I don't plan to cut or destroy the can in any way. This way I get to have my cake and eat it to so to say. Mack cabover and a 2 stroke detroit. I plan to clear coat the original patina on the truck and make a car hauler for my wife's 36 chevySent from my SAMSUNG-SM-G890A using Tapatalk Quote Link to comment Share on other sites More sharing options...
Vladislav Posted March 31, 2018 Share Posted March 31, 2018 Sounds like a plan The cab on the Mack looks solid on the pics. If you don't go with Detroit Mack END-673 and many other later Mack straight six engines would fit the chassis as a directy swap. Don't know about the chassis brackets but the originals are too probably there. I also keep my eye on a H-model but having enough of projects at the moment and also being far away that's not what I'd expect to pop up as a deal in the distant future. Will keep my attention to your progress. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
Hobert62 Posted March 31, 2018 Share Posted March 31, 2018 Good luck and make sure you keep posting pictures. We "I" love to see pictures of other people's projects. Quote Link to comment Share on other sites More sharing options...
Adam smith Posted April 1, 2018 Author Share Posted April 1, 2018 Good luck and make sure you keep posting pictures. We "I" love to see pictures of other people's projects. Sure will, I have a few projects to finish before I start on the mack. This will be my wife's new ride.Sent from my SAMSUNG-SM-G890A using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
terry Posted April 1, 2018 Share Posted April 1, 2018 lucky gal!!! 1 Quote Link to comment Share on other sites More sharing options...
Pavement Posted December 13, 2018 Share Posted December 13, 2018 I'd be interested in buying your project if you'd consider selling it. I am only a couple hours away from you. I'd trade 32-34 ford pickup project too. Call me 480-334-8251 Quote Link to comment Share on other sites More sharing options...
PaulH63 Posted December 14, 2018 Share Posted December 14, 2018 Nice H.If you have a serial number write to Mack Museum the will send you a build sheet and any other information they have in there archives. If need parts feel free to contact me.Ive got an H63 I'm restoring and H67. I'm willing to part with what I don't need. Quote Link to comment Share on other sites More sharing options...
mack4ever Posted December 14, 2018 Share Posted December 14, 2018 hallo Paul.i`m looking for some parts to.maybe you can help me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.