Moparmike Posted March 28, 2018 Share Posted March 28, 2018 Ok guys new turbo here ..so a few questions before I try to start it up.took air cooler out cleaned it out oil line cleaned going to pour oil in turbo before I start it to ensure it's not dry..change oil and air filters along with oil..anything else I need to look for before starting it up..im sure it's going to smoke like crazy... Quote Link to comment https://www.bigmacktrucks.com/topic/52945-new-turbo-is-here-now-what/ Share on other sites More sharing options...
fjh Posted March 28, 2018 Share Posted March 28, 2018 Long as you thoroughly checked the intake plumbing your good to go Quote Link to comment https://www.bigmacktrucks.com/topic/52945-new-turbo-is-here-now-what/#findComment-395328 Share on other sites More sharing options...
Mackpro Posted March 28, 2018 Share Posted March 28, 2018 Check up in the air cleaner housing too. The ASET AC engine turbos were known to puke bits back up into the air fiter and piping. Seen way to many new turbos suck bits back through them out of the air filter and piping. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/52945-new-turbo-is-here-now-what/#findComment-395347 Share on other sites More sharing options...
Mack Technician Posted March 28, 2018 Share Posted March 28, 2018 All the above plus peek in the oil hole of old one and make sure the shaft is in one piece, if not we would pull the pan/return pipe and get the frags cleaned out. Have chased the missing/failed exhaust impeller down to the pipe elbow just under the vertical muffler. Manditory new air filter and complete disassembly of all air inlet joints from filter housing to CMCAC inlet. Quote Link to comment https://www.bigmacktrucks.com/topic/52945-new-turbo-is-here-now-what/#findComment-395351 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.