880joe Posted September 27, 2021 Share Posted September 27, 2021 Ok mine is a 613 but after looking closer at your stripes I believe mine are a little different. I'll post vin in a few days when I'm home and think of it. What year model is the limited edition 1 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480539 Share on other sites More sharing options...
bbigrig Posted September 27, 2021 Author Share Posted September 27, 2021 11 hours ago, 880joe said: Ok mine is a 613 but after looking closer at your stripes I believe mine are a little different. I'll post vin in a few days when I'm home and think of it. What year model is the limited edition 1993 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480555 Share on other sites More sharing options...
Vladislav Posted September 27, 2021 Share Posted September 27, 2021 18 hours ago, bbigrig said: For comparison purposes. Similar frame rails. Not exact. Very few bends and curves in comparison to other models Mack offered. R series style cross members used. The table is what I used for reference. Just didn't post. As you see CH has 10" rails and I suppose pre-2004 Vision either. CM had 9.27 as printed in the pdf file and the table points out 9.38. So there's a mess already. I may suppose the rail section was the same channel as CL600/RW600 rear portion of the rails had. 9.27 could me missprinted 9.37 or vice versa and 9.38 as just approximated 3.37. Interesting point are the CM rails SAE 1/4" 6.35 mm or metric 6.00? BTW the table shows 0.24" thick steel both for CM and CH. But it shows the same figure for MH/RW. At the same time two of my MH's have 6.35 thick rails and one of them is as late as '91. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480568 Share on other sites More sharing options...
Vladislav Posted September 27, 2021 Share Posted September 27, 2021 18 hours ago, mrsmackpaul said: I have never seen a midliner with a bonnet or hood on it, I assumed that was a North American thing Vlad do you know if a hood was ever offered in Europe? Paul No Paul, as long as I know the hood never showed up in Europe excepting a few trucks imported from the US (probably to Russia only). So my understanding the hood was American thing. Together with the reworked cab. As for the spoke wheels as I figure we say Midliner for CS and MS cabover. The brochure I posted describes CM which didn't seem called Midliner by Mack. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480569 Share on other sites More sharing options...
bbigrig Posted September 27, 2021 Author Share Posted September 27, 2021 (edited) 29 minutes ago, Vladislav said: No Paul, as long as I know the hood never showed up in Europe excepting a few trucks imported from the US (probably to Russia only). So my understanding the hood was American thing. Together with the reworked cab. As for the spoke wheels as I figure we say Midliner for CS and MS cabover. The brochure I posted describes CM which didn't seem called Midliner by Mack. The hooded Midliner built by Renault was never available in Europe. There were a few customers from the Netherlands (as an example) that had to order CS Midliner models (with hoods) from a Canadian dealer and have them shipped back to Europe. Renault/Mack refused to sell them direct from factory. CS and MS Midliner were never offered with spoke wheels. The CM400 model line was referred to by Mack as " The Baby 8" (small class 8) The CM was engineered and built solely by Mack in Macungie PA. Edited September 27, 2021 by bbigrig 1 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480570 Share on other sites More sharing options...
mrsmackpaul Posted September 27, 2021 Share Posted September 27, 2021 So much to learn about these Macks, I'm gunna have to re-read this thread as I'm getting a little lost (this happens quite often with me) and want to make sure I get the facts as close to correct in my peanut size brain as I can 😉 Paul 1 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480571 Share on other sites More sharing options...
Popular Post mrsmackpaul Posted September 27, 2021 Popular Post Share Posted September 27, 2021 So many letters I think I got confused some what, carry on as I can now see by my quick re-read I was getting a tad lost 🤔 Not to worry I think Im back on track now Paul 3 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480572 Share on other sites More sharing options...
880joe Posted September 28, 2021 Share Posted September 28, 2021 Ok my last six of vin is 001873 pretty sure it's not 1 of the limited edition Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480621 Share on other sites More sharing options...
bbigrig Posted September 29, 2021 Author Share Posted September 29, 2021 On 9/28/2021 at 12:57 PM, 880joe said: Ok my last six of vin is 001873 pretty sure it's not 1 of the limited edition The last CL Elite Limited Edition build serial number ends in 1466 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480651 Share on other sites More sharing options...
880joe Posted September 30, 2021 Share Posted September 30, 2021 Thanks for checking and the information bbigrig 1 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-480668 Share on other sites More sharing options...
Popular Post bbigrig Posted April 13 Author Popular Post Share Posted April 13 2 1 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-549916 Share on other sites More sharing options...
Popular Post bbigrig Posted April 13 Author Popular Post Share Posted April 13 1 2 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-549918 Share on other sites More sharing options...
mrsmackpaul Posted April 14 Share Posted April 14 That looks sharp, it has come up well Paul 1 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-549928 Share on other sites More sharing options...
mowerman Posted April 14 Share Posted April 14 That thing would look right nice in my yard . Wasn’t someone on here selling one a few weeks ago box truck not sure… bob 1 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-549940 Share on other sites More sharing options...
Vladislav Posted April 15 Share Posted April 15 A candy! A pleasure to look at! 1 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-549987 Share on other sites More sharing options...
Erickson6111 Posted April 22 Share Posted April 22 Data on this CM is fairly hard to find. What is GVWR? Is it 33,001? Or simply however many axles a guy can hook up behind it? Would be nice to hook up to B-train high boys and go haul hay bales 1 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-550321 Share on other sites More sharing options...
glenbjackson Posted May 12 Share Posted May 12 (edited) On 9/26/2021 at 9:29 AM, Vladislav said: Thanks for the details, almost new story to me. A bit more of couriosity, and sorry for that - what are the front spring hangers and spring packs? CH I suppose? Or R? To my understanding CH has different spacing between the springs than an R but the axle beam is probably just drilled a bit different like it was done to MH/RW being basically the same casting used on R's, CH's, MH's etc. And how are the air tanks and battery boxes arranged? I don't see what was typical for a Mack chassis of the era on your pictures. the front beam is shared around, it has a large flat pad thats wider then my frames/spring spacing. i just noticed it replacing my tie rod and leaky hand primer pump(left me stranded). replaced injection pumps hand-primer and added one after the tank to get fuel pass the primary filter. as im checking out my axles i have a eaton 24000lbs rear axle and im gather from here a mack axle up front. i dont know original GVWR, currently under the radar and AT 26000lbs. my truck has been a road-tractor then a dump truck, now a flatbed truck and in future a darak runner. yes whatever you the truck builder makes it and registers it as. i have double frame i was surpised. just gonna add dual drag arms and shocks to both axles. with macks t-case hoping its not too baby to fit shafts long enough for full axle travel my cab is fastened to frame by four rubber cylinders(just solid isolators) and four shocks. Pedigreed Bulldog great job on restoration. i like the colors. and thanks for info. What rear axle do you have? and any tips on replacing wheel seal?? i changed twice!!! and still leaks. oddly enough i can see the seal through inspection holes in the spider, the seal is completely dry!!!! Edited May 12 by glenbjackson Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-551535 Share on other sites More sharing options...
Brocky Posted May 12 Share Posted May 12 On the wheel seal.. Get out your mic and calipers and do some measuring.. I had a new Frtlnr that came thru new with the inside of wheel bearing .010 larger than the spindle.. went thru 3 sets of seals before the shop figured it out.. 2 Quote Brocky Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-551552 Share on other sites More sharing options...
bbigrig Posted November 15 Author Share Posted November 15 (edited) Check out the Baby 8 at Trucktoberfest 2024 Mack Museum https://youtube.com/shorts/3wJ9johEo-4?si=T9CGcl3PrDvb90da Edited November 15 by bbigrig 1 Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-561978 Share on other sites More sharing options...
mowerman Posted November 15 Share Posted November 15 Excellent thanks Quote Link to comment https://www.bigmacktrucks.com/topic/53315-call-me-crazyive-got-cm422-on-the-brain/page/3/#findComment-561983 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.