wilbur Posted June 21, 2018 Share Posted June 21, 2018 On a 2000 ch 613. It works sometimes mostly not. If you hit the dash around the guage it will work for a while. I replaced the guage but no different. I was thinking about finding the wires in the main plug and soldering them to the clips the guage plugs into, to eliminate the circuit board. Your thoughts.? Thanks. Quote Link to comment https://www.bigmacktrucks.com/topic/53625-water-temp-guage/ Share on other sites More sharing options...
wilbur Posted August 5, 2018 Author Share Posted August 5, 2018 My dash lights are out also. Mother Board? Quote Link to comment https://www.bigmacktrucks.com/topic/53625-water-temp-guage/#findComment-403663 Share on other sites More sharing options...
Wilson Arias Posted October 9, 2018 Share Posted October 9, 2018 Hi..! Quote Link to comment https://www.bigmacktrucks.com/topic/53625-water-temp-guage/#findComment-407548 Share on other sites More sharing options...
Wilson Arias Posted October 9, 2018 Share Posted October 9, 2018 I have Rd690 E7 & 97 Mack Is not working the temp gauge .. I needs help, I change the temp sensor plus new gauge ..! In the dashboard.. Quote Link to comment https://www.bigmacktrucks.com/topic/53625-water-temp-guage/#findComment-407549 Share on other sites More sharing options...
wilbur Posted February 23, 2019 Author Share Posted February 23, 2019 I just got around to doing this. Worked great. I used a 2 prong plug for the sensor wire and positive and a single plug for ground. It can all be unplugged to remove dash. Quote Link to comment https://www.bigmacktrucks.com/topic/53625-water-temp-guage/#findComment-416469 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.