Jump to content

Recommended Posts

2009 CHU MP8 starts and idles fine, even revs good. When you get it out on the road does great shifting through the low side but once you get to high side it’s like you lose throttle but it’s on the floor. Pulled code and showing engine fuel delivery pressure. I check valve on the front of the head and the plunger is moving freely. I also check fuel filter house bc I had one that was sucking air on the backside of primer but it seems to fine. Could it possibly be the cups? I looked in fuel tank to see if there were any bubbles coming out on the return and nothing. 

Link to comment
https://www.bigmacktrucks.com/topic/53776-fuel-delivery-pressure/
Share on other sites

Check for trash in the bajo fitting on the eecu cooler plate. I think the top fitting is the inlet. If noting there check at the filter base inlet for trash. I've seen small bits of trash float around inside the inlet under that plastic cap and block off the tiny fuel passage. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...