66rmack Posted September 16, 2018 Share Posted September 16, 2018 Hey guys I went to replace the air compressor on a friends truck. 95 dm with a e7 350. Any way the new compressor he supplied has side to side play on the inlet. Like a lot, about 3/16 side to side. He wanted me to put it on but I said something isn’t right. The old worn out one has no side to side play. I suggested taking the new compressor back it came from fleet pride. Am I right or am I worried about nothing? As always thank you for any answers ahead of time. Quote Link to comment https://www.bigmacktrucks.com/topic/54291-new-air-compressor/ Share on other sites More sharing options...
Freebob Posted January 31, 2019 Share Posted January 31, 2019 Do you mean input shaft? Quote Link to comment https://www.bigmacktrucks.com/topic/54291-new-air-compressor/#findComment-414546 Share on other sites More sharing options...
JoeH Posted February 20, 2019 Share Posted February 20, 2019 Not sure, but I have been less than impressed with "rebuilt" air compressors from my dealer for my endt676 engine. I've replaced a couple because my wet tank loads up with a thick oily tar. Throwing rebuilt compressors at it won't make it stop filling with this tar so I gave up and just drain the tank every month or two, drawing as much as half a gallon or more of this crap out. Quote Link to comment https://www.bigmacktrucks.com/topic/54291-new-air-compressor/#findComment-416110 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.