Jump to content

Volkswagen introduces e-Delivery light trucks


kscarbel2

Recommended Posts

Green Car Congress  /  September 24, 2018

Brazil-based Volkswagen Truck & Bus introduced the e-Delivery electric truck (earlier post)—a battery electric version of the company’s Delivery mode—at the 2018 IAA Commercial Vehicle Show. The model will enter production by 2020.

Volkswagen also introduced the e-Flex flexible architecture for the electrification of the Volksbus.

e-Delivery. The Brazilian team developed a new powertrain and battery pack for the electric truck. The lithium-ion-nickel-manganese-cobalt (NMC) battery pack supports a range of more than 200 km (124 miles). The battery has a quick-charging mode which reaches 30% capacity in 15 minutes and 100 percent in three hours. The new powertrain achieves an output of up to 260 kW with a maximum torque of 2,150N·m.

The truck’s modular configuration makes flexible assembly possible and provides more space for batteries. The vehicle is divided into three parts: a front module with the cabin and additional functions, a middle module with the batteries, and the rear module with the powertrain. The modules are independent of each other, so that the various components and designs can be easily combined for other electric vehicles as well.

The model presented at the IAA has also been improved with respect to its intelligent systems. Pneumatic suspension and a smart payload reading system, for example, synchronize the load and electricity consumption in the eco-drive mode.

The brake has three regeneration stages. This enables up to 30% of the power to be recuperated during braking. This energy is used to charge the battery. The regenerative brake engages before the pneumatic brake. The entire system can be adjusted according to the charging status or the driver’s preferences. Systems such as the air compressors, air conditioning, steering and water pump are controlled independently of each other, thus optimizing their electricity consumption. Axles, chassis, wheels and tires retain their traditional features and their robustness in the new Delivery line. They share platform components with the diesel vehicle family. Synergies and scaling can therefore reduce costs.

Volksbus e-Flex. The Volksbus e-Flex is a flexible architecture for the electrification of this vehicle. The concept can be applied to any of the brand’s vehicles. It works with battery electric vehicles (BEV), hybrid electric vehicles (HEV), plug-in hybrid electric vehicles (PHEV), and range extended electric vehicles (REEV). The performance is the same, regardless of how the batteries are charged.

The batteries, developed internally by Traton Group, can be charged using external chargers or a generator in the vehicle. The generator is driven by the Volkswagen 1.4 TSI Flex, which is currently used in the Golf. This engine can be run on gasoline or ethanol, and a version for natural gas or biomethane (1.4 TGI) is also available.

The generator and engine set starts automatically by means of intelligent vehicle electronics as soon as the pre-programmed battery charging level is detected.

.

.

Photo 7.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...