Coenut Posted September 30, 2018 Share Posted September 30, 2018 I want to make sure I have this correct. Does the shifter boot in an r model mount on top of the floor pan? Or does it secure to the underside of the pan? Does it get secured to the pan then the carpet and finally the ring using different fasteners? So that the boot remains in place if you need to remove the ring and carpet. It probably gets sandwiched to the pan by the ring carpet, but want to be sure. Nobody wants water or a draft. Quote Link to comment https://www.bigmacktrucks.com/topic/54444-shifter-boot/ Share on other sites More sharing options...
kscarbel2 Posted September 30, 2018 Share Posted September 30, 2018 The 8MY324 R-model shifter boot mounts on top of the floor pan with a rectangular metal retainer atop it. Quote Link to comment https://www.bigmacktrucks.com/topic/54444-shifter-boot/#findComment-406922 Share on other sites More sharing options...
Vladislav Posted September 30, 2018 Share Posted September 30, 2018 Yes, as said above. The boot tops on the pan and than you put sheet metal frame on top of it and secure with machine screws. My R has a carpet from the factory but now its condition doesn't allow to judge it was atop of the boot retainer originally or below. More looks like 1st case. The boots itself are a mystery to me. There are two styles of them (both avalible from PAI). One is a small rectangular shape and another is elliptic on its sides. And twice larger. The 1st one is what I have in the R. The 2nd one is installed in MH but I saw some pics of Superliners (and R's ?) with that big one either. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/54444-shifter-boot/#findComment-406940 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.