mackimize Posted October 9, 2018 Share Posted October 9, 2018 According to the exhaust emissions tag on the block, I have a 1978 ENDT-676 rated at 283 hp Stamped on the bullgear cover is T676-8A8100 Looking for any info on the engine Next, I am in need of a fuel lift pump. The one on the engine has American Bosch cast into the side. The one I am need of, according to what info I have so far, is 314GC228A / ESP-3597. This part number is discontinued and the available parts are $350 and up. Would another lift pump work if rated to flow the same from a different generation of Mack engine work ? like a 314GC227? Thanks Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/ Share on other sites More sharing options...
41chevy Posted October 10, 2018 Share Posted October 10, 2018 (edited) Try PAI Phone: 770-822-1000 Should have them in stock They fit 250H.P. and up. Edited October 10, 2018 by 41chevy Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407599 Share on other sites More sharing options...
mackimize Posted October 10, 2018 Author Share Posted October 10, 2018 I have called a local PAI distributors about ESP-3597 and was told it's discontinued. Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407605 Share on other sites More sharing options...
kscarbel2 Posted October 10, 2018 Share Posted October 10, 2018 Big trucks are big bucks. Big old trucks that Volvo doesn't want to supply parts for are even bigger bucks. Your typical AMBAC (American Bosch) APE 6BB fuel pump on a 676 has a part number 319GC110 supply pump. Are you sure your fuel pump is a PLM? Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407609 Share on other sites More sharing options...
mackimize Posted October 10, 2018 Author Share Posted October 10, 2018 (edited) pretty sure, based on image comparison I get it, the throttle return spring is crap. I did get the truck for $800 Edited October 10, 2018 by mackimize Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407613 Share on other sites More sharing options...
mackimize Posted October 10, 2018 Author Share Posted October 10, 2018 Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407614 Share on other sites More sharing options...
mackimize Posted October 10, 2018 Author Share Posted October 10, 2018 here is the supply pump. Trying to figure out the image up load thing Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407615 Share on other sites More sharing options...
kscarbel2 Posted October 10, 2018 Share Posted October 10, 2018 Where did you obtain the 314GC228A number? Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407616 Share on other sites More sharing options...
mackimize Posted October 10, 2018 Author Share Posted October 10, 2018 process of elimination from supply pumps that resembled the one on the truck and that supported over 250 hp Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407617 Share on other sites More sharing options...
kscarbel2 Posted October 10, 2018 Share Posted October 10, 2018 13 minutes ago, mackimize said: process of elimination from supply pumps that resembled the one on the truck and that supported over 250 hp Anyway............the correct part number is 319GC110. The mounting gasket is a 79-GA400554. (79 is/was the Mack vendor code for American Bosch. GA400554 is the AMBAC part number) You can call Watt's Mack (provider of the BMT website) at 1-888-304-6225 to order these parts. Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407618 Share on other sites More sharing options...
mackimize Posted October 10, 2018 Author Share Posted October 10, 2018 (edited) with no part number on it and no catalog to leaf through, here i am trying to figure out the part I am in search of. Thank you so much for your gracious information. What an absolute joy it have been discussion this topic with you. Edited October 10, 2018 by mackimize Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407621 Share on other sites More sharing options...
theakerstwo Posted October 10, 2018 Share Posted October 10, 2018 8 hours ago, mackimize said: here is the supply pump. Trying to figure out the image up load thing Not too many years back a repair kit was still around for that pump.It will have the valves and springs and I think the seats for that pump. 2 Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407624 Share on other sites More sharing options...
kscarbel2 Posted October 10, 2018 Share Posted October 10, 2018 7 hours ago, mackimize said: with no part number on it and no catalog to leaf through, here i am trying to figure out the part I am in search of. Thank you so much for your gracious information. What an absolute joy it have been discussion this topic with you. Or you can go to your Mack brand distributor with your truck's model and serial number, located on the vehicle identification plate affixed to the driver's door, and have them look up the parts. Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407626 Share on other sites More sharing options...
kscarbel2 Posted October 10, 2018 Share Posted October 10, 2018 2 hours ago, theakerstwo said: Not too many years back a repair kit was still around for that pump.It will have the valves and springs and I think the seats for that pump. Or you could purchase them separately........ Plunger 79-VA7962 Spring 79-SP400608 Quote Link to comment https://www.bigmacktrucks.com/topic/54511-endt-676-info-and-parts/#findComment-407632 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.