big a 260xw Posted October 17, 2018 Share Posted October 17, 2018 I am trying to find a input shaft for a TRQ7210 Quadraplex transmission. It needs to be for a twin disc clutch 2 inches in diameter 10 spines and 25 teeth. This is the part number at least this is what was given to me. 764KB395A Thanks in advance. Quote Link to comment https://www.bigmacktrucks.com/topic/54583-trq-7210-input-shaft/ Share on other sites More sharing options...
AZB755V8 Posted October 18, 2018 Share Posted October 18, 2018 10 minutes ago, big a 260xw said: I am trying to find a input shaft for a TRQ7210 Quadraplex transmission. It needs to be for a twin disc clutch 2 inches in diameter 10 spines and 25 teeth. This is the part number at least this is what was given to me. 764KB395A Thanks in advance. I was looking back about 15 years ago for one. The only way even back then was to find a transmission with the twin disc clutch input shaft. There is a different bellhousing for the twin disc as well. Not the same as a single disc clutch. Don't know your setup but South Bend Clutch can beef up the springs and use ceramic pucks for better torque capacity for ether clutch. Quote Link to comment https://www.bigmacktrucks.com/topic/54583-trq-7210-input-shaft/#findComment-408087 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.