Popular Post Mack Technician Posted December 3, 2018 Popular Post Share Posted December 3, 2018 (edited) I've been experimenting for years on a cure for salt cancer. This stuff is the best and worst out there. Best because it works like a charm at sealing out salt and water and is impossible to wash off, worst because it is impossible to deal with when it gets on you. It doesn't just get on you, it bonds to you and becomes integrated to your body for the next week or two. We use it at the facility to lubricate massive, slow RPM, turntable gears. The consistency is liquid for the first 10 minutes then it becomes a black petroleum gum similar to pine pitch. In cold weather and after years in service it stays soft and shiny, you can cut it with your fingernail. After I rebuilt my Meat Collector Edition F150 I coated it, top to bottom, and all drivetrain units. I did interior body pockets and dead spaces, door interiors, included foot-salt run off zones, beautiful. Has no residual smell even on a hot day. When I did the tank I set it on my chest while lifting, it ripped holes in my bio-hazard smurf suit and tore my thin latex gloves. Small price to pay for an eternally mummified steel. In time it loses it's surface tackiness. Edited December 3, 2018 by Mack Technician 4 Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/ Share on other sites More sharing options...
HeavyGunner Posted December 3, 2018 Share Posted December 3, 2018 I have a neighbor who used Gibbs oil to stop any rusting on his vintage truck. I’ve used Stop Rust on stuff. Seems to work. Supposedly stops the rust and turns into a hard epoxy shell. Quote The problems we face today exist because the people who work for a living are outnumbered by the people who vote for a living.The government can only "give" someone what they first take from another. Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410580 Share on other sites More sharing options...
davehummell Posted December 3, 2018 Share Posted December 3, 2018 If you ever spent any time around a working dragline you would soon learn all about open gear lube ten times worse than any chassis grease to get off. 2 Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410588 Share on other sites More sharing options...
Mack Technician Posted December 3, 2018 Author Share Posted December 3, 2018 (edited) 1 hour ago, davehummell said: If you ever spent any time around a working dragline you would soon learn all about open gear lube ten times worse than any chassis grease to get off. In your hair, cut it off. On your clothes, throw'em out. In your eyes...….. Kidding aside, 3M Brake Cleaner liquefies it. Edited December 3, 2018 by Mack Technician 1 1 Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410591 Share on other sites More sharing options...
MACKS Posted December 3, 2018 Share Posted December 3, 2018 How would this hold up in a marine environment say to coat a below deck aluminum fuel tank,any idea,I've heard of some people using coal tar with good success but this sounds better. Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410592 Share on other sites More sharing options...
Mack Technician Posted December 3, 2018 Author Share Posted December 3, 2018 11 minutes ago, MACKS said: How would this hold up in a marine environment say to coat a below deck aluminum fuel tank,any idea,I've heard of some people using coal tar with good success but this sounds better. Don't know? You have a Lawson Dealer near you? I put in my order, Lance (salesman) submits it to be delivered to my house, arrives in 2 days (from Chicago) and I get a bill at end of the month. https://www.lawsonproducts.com/Drummond/Duty-Master-Open-Gear-Lubricant/DA6250.lp?_requestid=408398 There are multiple kinds and they are completely different. I tried three different brands. Lawson sells 2 dissimilar types, one thin and then the stuff pictured. Some like CRC Extreme Duty Open Gear and Chain Lube have the consistency of smooth butter with no real tack. Wasted a bill on it, not very good, rubs and washes off. Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410595 Share on other sites More sharing options...
MACKS Posted December 3, 2018 Share Posted December 3, 2018 Ok thank Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410607 Share on other sites More sharing options...
Bullheaded Posted December 3, 2018 Share Posted December 3, 2018 Krown works up here. And you never have any seized fasteners. And it good for electronics. Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410610 Share on other sites More sharing options...
Mack Technician Posted December 3, 2018 Author Share Posted December 3, 2018 43 minutes ago, MACKS said: Ok thank Stuff says you can apply to wet surfaces, but don’t. Fine if your spraying a wet gear once a week, like in a maintainence program. If you want it to stick well and last without a bunch of applications pressure wash and dry the surface. Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410613 Share on other sites More sharing options...
Bullheaded Posted December 3, 2018 Share Posted December 3, 2018 I've never seen those brands here. That's why we all use Krown. Does that stuff creep like Krown? And if you spray Krown on a wet piece of steel, the water will actually bead and roll off. So don't know if it is any better but it's all I know and it has saved my vehicles. They have a de-salt wash now too. I get it done and it works really nice. The chemicals they have on the roads here, and the amounts they put on are ridiculous. You literally have to keep stopping and using a liquid to clean your headlights because it is like a layer of cement on them. Here's the stuff I use: https://www.krown.com/en/ 1 Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410616 Share on other sites More sharing options...
Bullheaded Posted December 3, 2018 Share Posted December 3, 2018 I've also found it more beneficial to spray in the spring rather than before winter. The salt and chlorides do more damage once the temperature warms up. Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410617 Share on other sites More sharing options...
Mack Technician Posted December 4, 2018 Author Share Posted December 4, 2018 3 hours ago, Bullheaded said: I've never seen those brands here. That's why we all use Krown. Does that stuff creep like Krown? And if you spray Krown on a wet piece of steel, the water will actually bead and roll off. So don't know if it is any better but it's all I know and it has saved my vehicles. They have a de-salt wash now too. I get it done and it works really nice. The chemicals they have on the roads here, and the amounts they put on are ridiculous. You literally have to keep stopping and using a liquid to clean your headlights because it is like a layer of cement on them. Here's the stuff I use: https://www.krown.com/en/ Never saw or heard of Krowns till this thread. I’ve tried a thinner Lanolin base, made by “fluid film”, but not as impressed with it. The Duty Master won’t creep, it will draw and pool, but not creep into fasteners as described. I also keep it off my wiring, can’t afford to experiment. Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410638 Share on other sites More sharing options...
MACKS Posted December 4, 2018 Share Posted December 4, 2018 It probably works good at sound dreading also.. Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-410650 Share on other sites More sharing options...
MACKS Posted February 26, 2019 Share Posted February 26, 2019 Hey MT,would you recomend using this on double frame rails to help stop rust and spreading,how long does it stay tacky? Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416717 Share on other sites More sharing options...
Freightrain Posted February 26, 2019 Share Posted February 26, 2019 So as long as you NEVER have to work on the truck again, it's good? LOL!! Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416728 Share on other sites More sharing options...
MACKS Posted February 26, 2019 Share Posted February 26, 2019 46 minutes ago, Freightrain said: So as long as you NEVER have to work on the truck again, it's good? LOL!! Lol,I don't mean the whole rail just along the top and bottom where the salt and moisture gets in between them,was thinking that would seal them up better than paint or undercoating.. Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416732 Share on other sites More sharing options...
Rob Posted February 26, 2019 Share Posted February 26, 2019 I've used the Lawson product on open gears in the past and it works well. If you get a truck up so weight is off the suspension and spray the spring leaves, they run quiet and work much easier. The rep used to stop by a couple of the shops weekly for clips and such and it was always really convenient. A little spendy at times for some items but they certainly have a lot and want to ensure you are happy is what I've found. I use a product by "Winzer" for door hinges and glass runs. It sprays on like a liquid foam and solids up clear getting into rolling bushings and such firming up as it dries. It's kinda like a chain lubricant. Funny with your original photo as I have a fresh "13" pool ball for the shifter, and an "8" for the steering column adjust in my RL-755LST model I have yet to install. 1 Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416733 Share on other sites More sharing options...
1958 F.W.D. Posted February 26, 2019 Share Posted February 26, 2019 Whats a three pack of that Drummond stuff run? I have to create an account and log in blah blah blah.........Would like to coat the underside of my 1500 Ram. Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416756 Share on other sites More sharing options...
Mack Technician Posted February 26, 2019 Author Share Posted February 26, 2019 7 hours ago, MACKS said: Lol,I don't mean the whole rail just along the top and bottom where the salt and moisture gets in between them,was thinking that would seal them up better than paint or undercoating.. not sure if it will penetrate, but would definitely glue it shut with a couple coats. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416761 Share on other sites More sharing options...
Rob Posted February 28, 2019 Share Posted February 28, 2019 Here is the stuff I use a lot of: Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416833 Share on other sites More sharing options...
Mack Technician Posted February 28, 2019 Author Share Posted February 28, 2019 On 2/26/2019 at 3:04 PM, 1958 F.W.D. said: Whats a three pack of that Drummond stuff run? I have to create an account and log in blah blah blah.........Would like to coat the underside of my 1500 Ram. Sells in a three pack of 20 OZ cans for $28.99. The guy I buy from is 715-564-3328, straight shooter. You will pay the shipping. Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416860 Share on other sites More sharing options...
Mack Technician Posted February 28, 2019 Author Share Posted February 28, 2019 On 2/26/2019 at 9:08 AM, Rob said: Funny with your original photo as I have a fresh "13" pool ball for the shifter, and an "8" for the steering column adjust in my RL-755LST model I have yet to install. It was the "8th" generation F150, so I picked the theme. My favorite vintage for general build, spec, etc. Keep putting the same driveline, engine, comp, harnesses, and diff gears into new versions of the old chassis since 2004. Motor is on it's third life. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416861 Share on other sites More sharing options...
Rob Posted February 28, 2019 Share Posted February 28, 2019 Nice theme. My grand daughter would absolutely love the color. Put a LOT of bedsides on that series due to rust under warranty from Ford in the 90's. Grandpa always called someone whom was different an "8 Ball", so was wondering how you cabbaged onto the theme. Once upon a time I installed higher end billiards tables so retained a high quality set of balls and had both mentioned earlier to fit shifter handles eventually. I've had them since about 1979 or early 1980. Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416862 Share on other sites More sharing options...
1958 F.W.D. Posted February 28, 2019 Share Posted February 28, 2019 4 hours ago, Mack Technician said: Sells in a three pack of 20 OZ cans for $28.99. The guy I buy from is 715-564-3328, straight shooter. You will pay the shipping. You have used it before......Rough stupid wild-ass guess.......How many cans you think to do the underside of a 1500 Ram Crew Cab/Short Bed? Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416868 Share on other sites More sharing options...
Mack Technician Posted February 28, 2019 Author Share Posted February 28, 2019 (edited) 1 hour ago, 1958 F.W.D. said: You have used it before......Rough stupid wild-ass guess.......How many cans you think to do the underside of a 1500 Ram Crew Cab/Short Bed? 2 packs of 3 cans is my guess. As far as interior spraying.....I sprayed the interior of the doors.....That wept from the rain drains (onto the low door jamb), a little at a time, for almost two years in the heat of direct sunlight and will want to stick onto the wife's pants when she hops in, so avoid that mistake. In places where I couldn't properly direct-spray the underside i used a weed sprayer to inject a mixture of waste oil. Places like the up side of the inner wheel well canopies. initially I bought a cheap roll of vapor barrier plastic for when I left it in the garage. It doesn't drip for very long and stiffens up. As mentioned, direct sun can thin the tar a bit. Edited February 28, 2019 by Mack Technician Quote Link to comment https://www.bigmacktrucks.com/topic/54946-cure-for-cancer/#findComment-416871 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.