1941 Mack EQ tandem TK **Exceptional Condition**

[Amos V.]

Hello all,  I am posting this for a friend of mine that is trying to sell this 1941 Mack EQ that is in amazing condition. The truck has been restored about 15 to 20 yrs ago and still looks amazing. I don't have all the specifics yet or drivetrain specs. But, if anyone is interested you can call, text or email him directly. He's a really good guy. So here is the info. Good Luck!!!! I will try and load the pics here or in another post.

Paul Fisher

Mount Pocono, Pa 18344

Phone  (570) 842-5000

Fax (570) 842-1555

paulfisherinc@aol.com

 

[Amos V.]

I personally would love to have this truck and remove the flat bed and add a fifth wheel. Then, restore a period correct trailer to pull. Amazing piece of Mack history!!

[Vladislav]

It looks like a rare animal.

Wonder what is the tandems setup? I can see a chain between the rear wheels/ Did Mack ever used them in tandem E-models? I saw a picture with a transfer case and two prop shafts in a Mack book. Also I saw in person the driveline to the rears of the style B's and later Mack had. But this design seems as another story. BTW whhat does EQ 5D mean& Factory diesel?

[41chevy]

  On 1/8/2019 at 8:52 PM, Vladislav said:

It looks like a rare animal.

Wonder what is the tandems setup? I can see a chain between the rear wheels/ Did Mack ever used them in tandem E-models? I saw a picture with a transfer case and two prop shafts in a Mack book. Also I saw in person the driveline to the rears of the style B's and later Mack had. But this design seems as another story. BTW whhat does EQ 5D mean& Factory diesel?

Expand  

EQ was tandem chain drive and was the direct replacement for the AB series.

1937-1950, 10661 pcs. produced, GVW is 11.3 tons, engine is EN454A

[tjc transport]

that chain looks stretched to me. 

probably needs a link or two removed, it looks very close to the ground. 

[terry]

  On 1/9/2019 at 1:21 AM, 41chevy said:

EQ was tandem chain drive and was the direct replacement for the AB series.

1937-1950, 10661 pcs. produced, GVW is 11.3 tons, engine is EN454A

Expand  

Was the Lanova diesel used in the late E models? I know of a local one with that engine.     terry

[j hancock]

  On 1/9/2019 at 12:15 PM, terry said:

Was the Lanova diesel used in the late E models? I know of a local one with that engine.     terry

Expand  

Yes it was.  Mack called it the END 672.  Starting in 1949, the Mack Diesel Caravan program traveled the country promoting the use of diesel engines in trucks.

I wouldn't be surprised that same gassers were converted to diesel as an upgrade by their owners.

[41chevy]

  On 1/9/2019 at 10:42 AM, tjc transport said:

that chain looks stretched to me. 

probably needs a link or two removed, it looks very close to the ground. 

Expand  

It appears to have the larger "Hi Speed" sprockets on it. Give it a max of either side of 50mph.

[Superdog]

  On 1/9/2019 at 12:55 PM, j hancock said:

Yes it was.  Mack called it the END 672.  Starting in 1949, the Mack Diesel Caravan program traveled the country promoting the use of diesel engines in trucks.

I wouldn't be surprised that same gassers were converted to diesel as an upgrade by their owners.

Expand  

I have a EQ factory desel that they had so many problems with,Mack sent them a new gas engine to repower it.,I don't think they ever used the 672 in the EQ wasn't it  510 ?

[j hancock]

  On 1/9/2019 at 11:15 PM, Superdog said:

I have a EQ factory desel that they had so many problems with,Mack sent them a new gas engine to repower it.,I don't think they ever used the 672 in the EQ wasn't it  510 ?

Expand  

Could be Mike.  Think that was a 519.

The END 672 started in Mack buses in 1948 and there was a push by Mack to advertise the use in trucks a year later with the EH and trailer.  Pretty much the end of the line for the E.

[BOB DINGSDALE]

the chain drive set up looks like someone put a tag axle on and sprockets between duels to get drive to tag. was done here on west coast a lot espesialy on log trailers to stop back axle from sliding on steep loose roads.

[BOB DINGSDALE]

what does chassis stand 4 EQ5D 1059 cause I don't think they put diesels in EQ's in 41

[41chevy]

  On 1/10/2019 at 1:13 AM, BOB DINGSDALE said:

the chain drive set up looks like someone put a tag axle on and sprockets between duels to get drive to tag. was done here on west coast a lot espesialy on log trailers to stop back axle from sliding on steep loose roads.

Expand  

The EQ's were built chain drive  . Look in front of the first rear wheel, there is the OEM chain oiler. The tag is driven off the front axle but it was a MACK installed option.

Edited January 11, 2019 by 41chevy

[41chevy]

  On 1/10/2019 at 12:36 AM, j hancock said:

Could be Mike.  Think that was a 519.

The END 672 started in Mack buses in 1948 and there was a push by Mack to advertise the use in trucks a year later with the EH and trailer.  Pretty much the end of the line for the E.

Expand  

   From the Mack Master Maintenance Manual 1940 to 1949. Complete service bulletins, special tools, repair procedures and literature by MACK, York Pennsylvania, Harrisburg Branch. Serial number DR 305-4. Mack Trucks and Bus. Includes Series E Trucks with engines-- EN 271, EN 290, EN 330, EN 354A, EN 431A, END 457 Engines;  Series L Truckengines EN 510A, EN 707A, ED, END 519, END 672, Cummins H, Cummins NH Engines; Series A Trucks with EN 291, EN 331, EN 377, EN 431, END 510 Engines.

Edited January 10, 2019 by 41chevy

[Vladislav]

  On 1/10/2019 at 1:19 AM, 41chevy said:

The EQ's were built chain drive or worm drive. Look in front of the first rear wheel, there is the OEM chain oiler. The tag is driven off the front axle but it was a MACK installed option.

Expand  

Very interesting. Have never heard of that and don't remember anyone ever noted on here. Do you have any factory pics of the setup or description?

And I'm sure EQ was just the next heavier series E after EH being driven with common Mack axles, single or double reduction. And the chain driven E had its special model name of ER.

[Vladislav]

  On 1/10/2019 at 2:00 AM, 41chevy said:

   From the Mack Master Maintenance Manual 1940 to 1949. Complete service bulletins, special tools, repair procedures and literature by MACK, York Pennsylvania, Harrisburg Branch. Serial number DR 305-4. Mack Trucks and Bus. Includes Series E Trucks with engines-- EN 271, EN 290, EN 330, EN 354A, EN 431A, END 457 Engines;  Series L Truckengines EN 510A, EN 707A, ED, END 519, END 672, Cummins H, Cummins NH Engines; Series A Trucks with EN 291, EN 331, EN 377, EN 431, END 510 Engines.

Expand  

I think END-457,ED, END-519 (have never seen such mark), END-672 and END-510 all were Lanovas. But the only engine I'm known of having Mack Lanova script on the exhaust manifold was Mack ED (519 c.i.).

[41chevy]

  On 1/10/2019 at 6:46 PM, Vladislav said:

Very interesting. Have never heard of that and don't remember anyone ever noted on here. Do you have any factory pics of the setup or description?

And I'm sure EQ was just the next heavier series E after EH being driven with common Mack axles, single or double reduction. And the chain driven E had its special model name of ER.

Expand  

Your correct I miss read manual, ER is Chain drive  and EQ is worm frive.

Most all of the 10 wheel EQ's are tag axled either dead drives  or chain driven tag.

EH - 1936-1950, the, 31539 pcs. produced, GVW is 11 tons, engine is EN454A rated at 121 hp;

EJ - 1937-1938, 762 pcs. produced, GVW is 8 tons;

EM - 1937-1943, 1584 pcs., GVW is 9.5 tons;

ER - 1936-1941, 359 pcs., GVW is 9.5 tons, chain drive,

EQ - 1937-1950, 10661 pcs. produced, GVW is 11.3 tons, engine is EN454A;

ES - 1938-1940, 75 pcs. produced, the details are unknown.

In 1950, 50 pcs were made of the version ETX. It featured a larger-diameter wheels and slightly modified front fenders.

[41chevy]

  On 1/10/2019 at 6:46 PM, Vladislav said:

Very interesting. Have never heard ofthat and don't remember anyone ever noted on here. Do you have any factory pics of the setup or description?.

Expand  

 

[Vladislav]

Many thanks! A nice sample of classic ingenuity.