ekennedy21 Posted April 22, 2019 Share Posted April 22, 2019 looking for the contractor swept back bumper for my 89 rw733. Any help would be appreciated. Quote Link to comment https://www.bigmacktrucks.com/topic/56830-superliner-bumper/ Share on other sites More sharing options...
ekennedy21 Posted April 22, 2019 Author Share Posted April 22, 2019 I guess a better way of saying this is, Has anyone had any success in switching from the flat rw-613 style bumper to the rw-713 style logger bumper that sits extend out from the grill and sweeps back on the ends? I imagine there are brackets to do this?? Quote Link to comment https://www.bigmacktrucks.com/topic/56830-superliner-bumper/#findComment-421115 Share on other sites More sharing options...
AZB755V8 Posted April 23, 2019 Share Posted April 23, 2019 (edited) 19 hours ago, ekennedy21 said: I guess a better way of saying this is, Has anyone had any success in switching from the flat rw-613 style bumper to the rw-713 style logger bumper that sits extend out from the grill and sweeps back on the ends? I imagine there are brackets to do this?? Yes it can be done but I would say the bumper is the least of your things to find. There are 3 brackets that are needed to make the center tow pin work. The flush mount brackets can not be used with the extended bumper. They are lighter duty items and the extended bumper brackets are massive compared to them. The photos are of a Superliner II and a CL713 which is very similar if not the same except for bit of extended frame in front on the CL. The brackets from a Superliner II or CL713 will work the bumper narrows at the ends on a Superliner and is straight on a CL. I am considering the same bumper switch, the actual bumper is the easy part. Edited April 23, 2019 by AZB755V8 add content 1 Quote Link to comment https://www.bigmacktrucks.com/topic/56830-superliner-bumper/#findComment-421190 Share on other sites More sharing options...
Vladislav Posted April 23, 2019 Share Posted April 23, 2019 From what I can see on the pics all the setup is parts you can fabricate relatively easy sure with some efforts. Including the bumper since it's made of straight steel with straight corners. The attachment parts seem not needed to be reproduced as an absolute clone to the original since they're not seen from the outside. In relation to that reproducing (fabricating) of the flat style Superliner II bumper would be much more difficult task due to its stamped shape. Lucky it's stll avalible new OEM. 2 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/56830-superliner-bumper/#findComment-421197 Share on other sites More sharing options...
Frank R Posted June 7, 2019 Share Posted June 7, 2019 This is a very easy thing to do, I have done several of them including the front pull box. You do not need to buy any factory brackets. Let me know if your still looking to do this and I will glade to help... Frank Quote Link to comment https://www.bigmacktrucks.com/topic/56830-superliner-bumper/#findComment-424714 Share on other sites More sharing options...
kscarbel2 Posted June 7, 2019 Share Posted June 7, 2019 On 4/21/2019 at 8:46 PM, ekennedy21 said: looking for the contractor swept back bumper for my 89 rw733. Any help would be appreciated. https://www.stengelbros.net/Mack-Logger-Truck-Bumpers_c_781.html 1 Quote Link to comment https://www.bigmacktrucks.com/topic/56830-superliner-bumper/#findComment-424716 Share on other sites More sharing options...
ekennedy21 Posted June 7, 2019 Author Share Posted June 7, 2019 2 hours ago, kscarbel2 said: https://www.stengelbros.net/Mack-Logger-Truck-Bumpers_c_781.html Thanks, I was able to get one from mack.... 1 Quote Link to comment https://www.bigmacktrucks.com/topic/56830-superliner-bumper/#findComment-424734 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.