Popular Post j hancock Posted August 25, 2019 Popular Post Share Posted August 25, 2019 Processed a lot of wood with this Husqvarna Rancher 61 saw over the years. Bought it new in 1981 and has never given any trouble. Just gas, oil and a new bar and chain every so often. Not bad for 38 years. 8 Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/ Share on other sites More sharing options...
wilbur Posted August 25, 2019 Share Posted August 25, 2019 thats what i need . new teeth or at least a few more. 1 1 Quote Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430821 Share on other sites More sharing options...
other dog Posted August 25, 2019 Share Posted August 25, 2019 11 minutes ago, wilbur said: thats what i need . new teeth or at least a few more. me too! 1 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430822 Share on other sites More sharing options...
Mack Technician Posted August 25, 2019 Share Posted August 25, 2019 Doesn’t look like you ever accidentally backed over it in the woods during 38 years? Good job! 1 Quote Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430826 Share on other sites More sharing options...
mowerman Posted August 26, 2019 Share Posted August 26, 2019 Excellent I have an eager beaver I got used in trade had only 7 years but also good luck 2 nd chain change recently but you got me beat by a mile...Bob Sent from my iPhone using Tapatalk Quote Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430835 Share on other sites More sharing options...
JoeH Posted August 26, 2019 Share Posted August 26, 2019 We have a poulan we bought 5? Years ago? POS. Carb settings real finicky, fuel lines swell up with local gas, not sure we've gotten 15 minutes of cutting out of the thing in it's life. Replaced it with a Husqvarna, which works pretty good but you gotta grab the throttle pretty much when you pull it to get it to start. And the auto bar oiler seems to have stopped working. Need to check it out. Quote Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430854 Share on other sites More sharing options...
j hancock Posted August 26, 2019 Author Share Posted August 26, 2019 14 hours ago, Mack Technician said: Doesn’t look like you ever accidentally backed over it in the woods during 38 years? Good job! Yup, always kept track of where it got set down. A friend made a wheel chock out of Stihl years back.... Oooops! Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430856 Share on other sites More sharing options...
fjh Posted August 26, 2019 Share Posted August 26, 2019 Yup to bad the sweads didn't stick with just saws and sewing machines something they are good at! But NO they had to get involved in trucks and equipment too!🙄 1 Quote Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430857 Share on other sites More sharing options...
j hancock Posted August 26, 2019 Author Share Posted August 26, 2019 14 minutes ago, JoeH said: We have a poulan we bought 5? Years ago? POS. Carb settings real finicky, fuel lines swell up with local gas, not sure we've gotten 15 minutes of cutting out of the thing in it's life. Replaced it with a Husqvarna, which works pretty good but you gotta grab the throttle pretty much when you pull it to get it to start. And the auto bar oiler seems to have stopped working. Need to check it out. Had a little Poulan between 1978-1986 for doing brush. Ran great and weighed nothing. Sold it to a fellow that had a tree service. He used for years running it one handed while working limbs from his bucket truck. He paid me more for it used than I paid for the saw brand new! Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430858 Share on other sites More sharing options...
j hancock Posted August 26, 2019 Author Share Posted August 26, 2019 3 minutes ago, fjh said: Yup to bad the sweads didn't stick with just saws and sewing machines something they are good at! But NO they had to get involved in trucks and equipment too!🙄 I am not too sure about the sawdust board they pass off as furniture at IKEA??? Would take a Scania Truck over the other! 1 Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430859 Share on other sites More sharing options...
Freightrain Posted August 27, 2019 Share Posted August 27, 2019 I've got a vintage Poulan that I got from a friend that past years ago. Big ol bounder. Heavy, not something you climb a tree with. I don't do a thing with it but put a fresh chain on it occasionally. It starts on about the 3rd pull every time no matter how many years it's been sitting in the shed. It will wear your back out if you have to man handle it around all day. But big or small wood, it blows through it. Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430907 Share on other sites More sharing options...
Quickfarms Posted August 27, 2019 Share Posted August 27, 2019 I have two craftsman, Poulon, saws that are about 20 years old. They are good but the chain tensioner sucks. And no vibration dampening gets old.I now have a 36 volt makita and I like that Saw. No gas, starts instantly and lasts a long time i bought it for the 4 batteries and double charger and basically got the Saw for almost nothing Quote Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430910 Share on other sites More sharing options...
other dog Posted August 27, 2019 Share Posted August 27, 2019 I had a Homelite XL12 that was about that old, it was great saw, cut tons of firewood with it. I also had a bigger, much heavier Homelite, a 925 that I only used for bigger trees. Unfortunately, they were in the shed when...you know the rest of the story. 1 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430916 Share on other sites More sharing options...
h67st Posted August 27, 2019 Share Posted August 27, 2019 22 hours ago, JoeH said: We have a poulan we bought 5? Years ago? POS. Carb settings real finicky, fuel lines swell up with local gas, not sure we've gotten 15 minutes of cutting out of the thing in it's life. Replaced it with a Husqvarna, which works pretty good but you gotta grab the throttle pretty much when you pull it to get it to start. And the auto bar oiler seems to have stopped working. Need to check it out. I have a Husky that's real finicky to start when it's warm...cold it starts right up. The auto oiler only works about half the time; I will say the thing will cut really nice. Quote Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430937 Share on other sites More sharing options...
1958 F.W.D. Posted August 27, 2019 Share Posted August 27, 2019 Hope you guys are running non-ethanol gas if you can get it. The corn fuel stuff is murder on small engine fuel systems. www.pure-gas.org Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430945 Share on other sites More sharing options...
other dog Posted August 27, 2019 Share Posted August 27, 2019 7 hours ago, 1958 F.W.D. said: Hope you guys are running non-ethanol gas if you can get it. The corn fuel stuff is murder on small engine fuel systems. www.pure-gas.org Always. Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430972 Share on other sites More sharing options...
other dog Posted August 27, 2019 Share Posted August 27, 2019 20 hours ago, other dog said: I had a Homelite XL12 that was about that old, it was great saw, cut tons of firewood with it. I also had a bigger, much heavier Homelite, a 925 that I only used for bigger trees. Unfortunately, they were in the shed when...you know the rest of the story. the rest of the story... there's one of the saws. Pretty sure that's the XL12, it had a 16'' bar, the 925 had a 20'' bar. here's another one. This is the 923 Homelite that I had in there for parts, didn't have a bar and chain on it. 1 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430974 Share on other sites More sharing options...
j hancock Posted August 28, 2019 Author Share Posted August 28, 2019 9 hours ago, 1958 F.W.D. said: Hope you guys are running non-ethanol gas if you can get it. The corn fuel stuff is murder on small engine fuel systems. www.pure-gas.org The supply of non-ethanol sometimes can be iffy in my parts. Knock on wood, I have used lots of "corn" in my two stroke equipment and have never had a fuel related issue. I always use Stihl 2 cycle engine oil in the fuel mix. 1 Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-430988 Share on other sites More sharing options...
JoeH Posted August 28, 2019 Share Posted August 28, 2019 Don't think non ethanol is available near me unless you go to the local small airports and tell them you have a small plane engine that you've rebuilt and need to test. Or so I've been told. Quote Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-431000 Share on other sites More sharing options...
h67st Posted August 28, 2019 Share Posted August 28, 2019 12 hours ago, other dog said: the rest of the story... there's one of the saws. Pretty sure that's the XL12, it had a 16'' bar, the 925 had a 20'' bar. here's another one. This is the 923 Homelite that I had in there for parts, didn't have a bar and chain on it. That aluminum really burned up. Do you know what caused the fire? Quote Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-431005 Share on other sites More sharing options...
other dog Posted August 28, 2019 Share Posted August 28, 2019 29 minutes ago, h67st said: That aluminum really burned up. Do you know what caused the fire? That one was magnesium, it kept bursting into flames even after the fire department doused it with water and put it out- several times. The fire was my fault. I was smoking a turkey in this old gas stove that I made into a smoker on Thanksgiving day. It was too close to the shed for one thing, almost right up against it. And I should have raked the dry leaves away from around it and wetted the grass with the water hose, which I usually did but didn't that time, and I should have kept a closer watch on it. Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-431008 Share on other sites More sharing options...
1958 F.W.D. Posted August 28, 2019 Share Posted August 28, 2019 For those of you who cannot find a local source of corn-free: www.pure-gas.org Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/58767-bucky-gets-some-new-teeth/#findComment-431022 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.