Golden_bulldawg_69 Posted September 3, 2019 Share Posted September 3, 2019 Working on a 94 CL714 originally equipped with an electronic engine, engine was swapped by the previous owner to a 90 model E7-460 (with poor work quality) having some issues with the dynatards and have narrowed it down to the wiring that passes from outside the cylinder head through the side and into the solenoids. Original wiring appears to have some sort of cotton insulation and is broken internally (continuity test shows open when manipulating the wiring by hand). The wiring is molded into what looks like a pipe fitting in the side of the head. Does anyone have a part number for the wiring harness or some kind of sealed bulkhead connector that threads into these cylinder heads? Thanks in advance, Any help is appreciated. Quote Link to comment https://www.bigmacktrucks.com/topic/58865-dynatard-pass-thru-wiring/ Share on other sites More sharing options...
Golden_bulldawg_69 Posted September 3, 2019 Author Share Posted September 3, 2019 Should add that the local dealers are no help as soon as you tell them the engine does not match the vin Quote Link to comment https://www.bigmacktrucks.com/topic/58865-dynatard-pass-thru-wiring/#findComment-431401 Share on other sites More sharing options...
fjh Posted September 3, 2019 Share Posted September 3, 2019 (edited) The only thing You may be able to uses is this 43MR213P2 If its still available and you will have to bush it up to 3/8 pipe! https://www.paiindustries.com/catalog/fraCatalog.php Edited September 3, 2019 by fjh Quote Link to comment https://www.bigmacktrucks.com/topic/58865-dynatard-pass-thru-wiring/#findComment-431402 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.