theduke24 Posted September 10, 2019 Share Posted September 10, 2019 i have a 2004 mack vision CX613 it turns over but wont start. the 29 pin round plug located a little behind and above the starter had a wire come out. i do not know what wire it hooks too. it has these numbers on it EJ1-10-05 and 64-3-B.can you tell me what wire iy goes too or have a wire diagram for that plug? Quote Link to comment https://www.bigmacktrucks.com/topic/58938-2004-vision-cx613-wont-start/ Share on other sites More sharing options...
Mackpro Posted September 11, 2019 Share Posted September 11, 2019 That’s gonna be a hard one. 2004 CX’s were an oddball year. They were the first year for the Aset engine and crammed it into the narrow CX frame . They were the only year to use that round connector to connect the engine wiring harness to the chassis/cab harness. Starting in the 2005 the wide fram CXU ( and CHU) came out and the round connector was replaced by a rectangle connector. Quote Link to comment https://www.bigmacktrucks.com/topic/58938-2004-vision-cx613-wont-start/#findComment-431817 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.