609albert Posted September 19, 2019 Share Posted September 19, 2019 I have a 54 LS85 Mack pumper that has what seems like too much steering play ,new tie rod ends did not help ,now thinking worn gears in the steering box, any help ,ideas, etc. Quote Link to comment https://www.bigmacktrucks.com/topic/59075-excess-play-in-steering-wheel/ Share on other sites More sharing options...
64C85 Posted September 19, 2019 Share Posted September 19, 2019 Could also be worn u-joints on the steering shaft. Quote Link to comment https://www.bigmacktrucks.com/topic/59075-excess-play-in-steering-wheel/#findComment-432417 Share on other sites More sharing options...
Firemack Posted September 19, 2019 Share Posted September 19, 2019 Check the drag link , it has 2 adjustable ends that have large screw type threaded ends that can be tightened to reduce the play, if the buttons are popped up then they need to be adjusted. If you have a manual will show how this is adjusted, but basically loosen up the end squeeze down the end play buttons which pop up when too much end play and tighten them down again. Quote Link to comment https://www.bigmacktrucks.com/topic/59075-excess-play-in-steering-wheel/#findComment-432455 Share on other sites More sharing options...
609albert Posted September 20, 2019 Author Share Posted September 20, 2019 ok John, I'll look into what you describe Quote Link to comment https://www.bigmacktrucks.com/topic/59075-excess-play-in-steering-wheel/#findComment-432480 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.