EWB555 Posted November 10, 2019 Share Posted November 10, 2019 Can someone please tell me where to tie into the circuits for the key on and battery accessory switches on a 2016 Granite dump truck? Pulled the entire dash apart last week and cannot find the leads. Quote Link to comment https://www.bigmacktrucks.com/topic/59769-2016-granite-auxiliary-switches/ Share on other sites More sharing options...
EWB555 Posted December 8, 2019 Author Share Posted December 8, 2019 I figured it out and wanted to share. There is a body builder connector under the back of the cab on the drivers side. Fortunately they put a label above it on the back of the cab that tells you what each pin is. On our truck only the stop, run, &turn lamps are wired. Ordered the deutch socket online for that particular connector and was able to wire my stobes to one switch, and the plow lights to the other. You crimp the socket to your wire and slide it in to the blank slot across from the corresponding pin. It’s a nice setup. I attached a screenshot of the socket part info and pictures of what the connector looks like in case anybody needs them. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/59769-2016-granite-auxiliary-switches/#findComment-437576 Share on other sites More sharing options...
j hancock Posted December 9, 2019 Share Posted December 9, 2019 Thanks for posting. Modern truck electronics are already enough of a pain without having to also play Hide and Seek. 1 Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/59769-2016-granite-auxiliary-switches/#findComment-437660 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.