Lmackattack Posted January 20, 2020 Share Posted January 20, 2020 Years ago I put a superliner cab air suspension on my truck. during the upgrade i also put R model hood rollers on the cowl. the issue is the driver side of the hood does not make contact with the roller. I raised the rollers 1/2", moved them forward but its still resting the cowl. im wondering if i am missing a part? anyone have a pic of a western mack with the hood / roller assembly? Thank you Quote Link to comment Share on other sites More sharing options...
seyser Posted January 20, 2020 Share Posted January 20, 2020 They must have used different setups over the years. My 79 R has flat metal plates on the cab side and round rubber hockey pucks on the hood side. Quote Link to comment Share on other sites More sharing options...
terry Posted January 20, 2020 Share Posted January 20, 2020 26 minutes ago, seyser said: They must have used different setups over the years. My 79 R has flat metal plates on the cab side and round rubber hockey pucks on the hood side. I believe that is a non air ride set up, the poster has a air ride cab, has a roller to move with the cab. terry Quote Link to comment Share on other sites More sharing options...
seyser Posted January 20, 2020 Share Posted January 20, 2020 Ah yes, that makes sense. I was always curious why the different setups. Didn’t event think about the cab being hinged and constantly moving. Quote Link to comment Share on other sites More sharing options...
Rob Posted January 20, 2020 Share Posted January 20, 2020 I don't have a photo Trent but the pads that mount on the underside of the hood are different for the rollers to bear against with air ride. Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment Share on other sites More sharing options...
Quickfarms Posted January 21, 2020 Share Posted January 21, 2020 This is two pieces the first piece bolts to the hood through the center of the bracket you have, I think the bolt is 3/8" fine tread, then the channel shaped piece attaches to it with two screws and nuts The parts are NLA trough Mack but it looks like PAI now has them 1 Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted January 21, 2020 Author Share Posted January 21, 2020 7 hours ago, Quickfarms said: This is two pieces the first piece bolts to the hood through the center of the bracket you have, I think the bolt is 3/8" fine tread, then the channel shaped piece attaches to it with two screws and nuts The parts are NLA trough Mack but it looks like PAI now has them 7 hours ago, Quickfarms said: This is two pieces the first piece bolts to the hood through the center of the bracket you have, I think the bolt is 3/8" fine tread, then the channel shaped piece attaches to it with two screws and nuts The parts are NLA trough Mack but it looks like PAI now has them (driverside) I have the plate that bolts to the hood but not that channel. where can i find a current Pai catalog. i thought i need to be a distributor to access their online parts. thats what i was told years ago. thank you Quote Link to comment Share on other sites More sharing options...
Quickfarms Posted January 21, 2020 Share Posted January 21, 2020 (driverside) I have the plate that bolts to the hood but not that channel. where can i find a current Pai catalog. i thought i need to be a distributor to access their online parts. thats what i was told years ago. thank youThe plate you have is the one that is riveted to the hood. Make shore the rivets are good and use the correct ones if you have to replace them. McMaster Carr has the rivets for the fiberglass You just need to register on the PAI website and you will get an email with your password and then you can log in and view/print the catalog pages Quote Link to comment Share on other sites More sharing options...
kscarbel2 Posted January 21, 2020 Share Posted January 21, 2020 The gray rollers pictured on the cab firewall are part number 55MX26. I can't recall the part number of the roller track that mounts on the hood, but most likely a 73RU number. Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted January 21, 2020 Author Share Posted January 21, 2020 yep i ordered new rollers last week and fitted them yesterday hopeful it would fix the hood rest issues but I suspect i need that channel attached to the plate. previously that plate had a large rubber puck bolted to it. i removed the puck thinking the new rollers would make contact on the plate but they dont. Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted January 21, 2020 Author Share Posted January 21, 2020 3 hours ago, Quickfarms said: The plate you have is the one that is riveted to the hood. Make shore the rivets are good and use the correct ones if you have to replace them. McMaster Carr has the rivets for the fiberglass You just need to register on the PAI website and you will get an email with your password and then you can log in and view/print the catalog pages ill try that tonight. thank you Quote Link to comment Share on other sites More sharing options...
Quickfarms Posted January 22, 2020 Share Posted January 22, 2020 yep i ordered new rollers last week and fitted them yesterday hopeful it would fix the hood rest issues but I suspect i need that channel attached to the plate. previously that plate had a large rubber puck bolted to it. i removed the puck thinking the new rollers would make contact on the plate but they dont.That explains why your hood looks like it is setup for the fixed cabThe passenger side channel is for the fixed cab, I actually need one of thoseYou will need two of the channels and two spacers Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted January 22, 2020 Author Share Posted January 22, 2020 2 hours ago, Quickfarms said: That explains why your hood looks like it is setup for the fixed cab The passenger side channel is for the fixed cab, I actually need one of those You will need two of the channels and two spacers got a assembly on Ebay tonight. need to source one more.. i also got set up on pai... great to see so many aftermarket parts available since Volvo is of little help these days 1 Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted January 31, 2020 Author Share Posted January 31, 2020 Thanks to everyone for the help with this. I also need to give thanks to Josh Yoos as he explained how he converted many of his trucks to Air ride cab. For those who are looking to do this conversion here is what worked for me. I unbolted the old solid mount hood rests from the fire wall and replaced with R model hood Roller brackets that bolted right up to the same location on the firewall. I then installed these parts on the Hood. they were direct bolt on after the old solid mount pads were removed. Hood Roller #55MX26 Hood Bracket #140QM213 Hood plate #140QM212 Quote Link to comment Share on other sites More sharing options...
PMC Posted January 9 Share Posted January 9 (edited) Working on a Superliner 1 and converting the hood over to rollers but having a little difficult getting things to line up. Using salvaged parts the hood seems to sit about half an inch high where the hood meets the cowl. Are there different height hood brackets? Edited January 9 by PMC Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted March 4 Author Share Posted March 4 On 1/9/2024 at 2:54 PM, PMC said: Working on a Superliner 1 and converting the hood over to rollers but having a little difficult getting things to line up. Using salvaged parts the hood seems to sit about half an inch high where the hood meets the cowl. Are there different height hood brackets? Maybe use smaller roller diameter to compensate? Quote Link to comment Share on other sites More sharing options...
PMC Posted March 10 Share Posted March 10 (edited) That’s a good idea, looks like they could be turned down to work. I did the opposite and made thinner brackets that mount on the hood. Seems to work ok. thanks pmc Edited March 13 by PMC 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.