dphsully Posted July 7, 2005 Share Posted July 7, 2005 Hi All,I have a '58 B95 Fire Engine with a 707 Thermodyne gas motor. I'm having no luck finding oil filters for this motor. (NAPA & Wix have discontinued them) Does anybody know a current source for filter for this motor?Thanks,Sully Quote Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/ Share on other sites More sharing options...
twostickmutt Posted July 9, 2005 Share Posted July 9, 2005 Hi All,I have a '58 B95 Fire Engine with a 707 Thermodyne gas motor. I'm having no luck finding oil filters for this motor. (NAPA & Wix have discontinued them) Does anybody know a current source for filter for this motor?Thanks,Sully←ihi sully. i have a 1947 LS85/ 707. i have the same problem. can't find filters. i may get a spin on filter kit from wix. then filters would be easiy to get. j.j. Quote and remember "PREFORMANCE COUNTS" Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-237 Share on other sites More sharing options...
dphsully Posted July 9, 2005 Author Share Posted July 9, 2005 ihi sully. i have a 1947 LS85/ 707. i have the same problem. can't find filters. i may get a spin on filter kit from wix. then filters would be easiy to get. j.j.←Thanks for the info, JJ. If I don't find any, I'll probably go the same route.Sully Quote Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-241 Share on other sites More sharing options...
twostickmutt Posted July 19, 2005 Share Posted July 19, 2005 Thanks for the info, JJ. If I don't find any, I'll probably go the same route.Sully←just ordered a spin on oil filter kit from carquest sully. i'll let you know how i make out. j.j./ 707 ls-85 Quote and remember "PREFORMANCE COUNTS" Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-445 Share on other sites More sharing options...
dphsully Posted July 19, 2005 Author Share Posted July 19, 2005 just ordered a spin on oil filter kit from carquest sully. i'll let you know how i make out. j.j./ 707 ls-85←Thanks, I apprieciate it.Sully Quote Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-448 Share on other sites More sharing options...
David Posted August 3, 2005 Share Posted August 3, 2005 I have some NOS Mack filters. They are part number 236GB123A. 6" dia, 7 1/2" long with a 1 5/8" hole. Call me if they are something you can use. Quote Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-738 Share on other sites More sharing options...
twostickmutt Posted August 3, 2005 Share Posted August 3, 2005 hi sully. if those filters won't work i just got my spin on kit from carquest. it looks like it will work fine and i'll always have a filter source. it's a kit that replaces earlier luber-finder. plan to install it this weekend. i'll send you part numbers later. j.j. Quote and remember "PREFORMANCE COUNTS" Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-741 Share on other sites More sharing options...
dphsully Posted August 3, 2005 Author Share Posted August 3, 2005 hi sully. if those filters won't work i just got my spin on kit from carquest. it looks like it will work fine and i'll always have a filter source. it's a kit that replaces earlier luber-finder. plan to install it this weekend. i'll send you part numbers later. j.j.←Thanks Dave. I'll look forward to hearing from you.Sully Quote Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-745 Share on other sites More sharing options...
twostickmutt Posted August 7, 2005 Share Posted August 7, 2005 hi sully. didn't get a chance to put on my oil filter conversion but here are CARQUEST'S numbers. the filter housing is no. 89750. the filter is 85749.(both carquest) .on my 707A the old filter housing is on the drivers side and is held on by( 3 )1/2 inch bolts. once you take the old housing off there is a feed port and a return port in the block. both of these are tapped for fittings. your 707 is probably a B or a C being newer. it may be the same as my A. let me know how you make out. good luck. j.j. Quote and remember "PREFORMANCE COUNTS" Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-833 Share on other sites More sharing options...
twostickmutt Posted August 17, 2005 Share Posted August 17, 2005 hey sully. that carquest spin on filter kit works damn fine.i put on my 707. my filter searching is over. hope you found your filters for your 707. j.j. Quote and remember "PREFORMANCE COUNTS" Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-1082 Share on other sites More sharing options...
dphsully Posted August 23, 2005 Author Share Posted August 23, 2005 hey sully. that carquest spin on filter kit works damn fine.i put on my 707. my filter searching is over. hope you found your filters for your 707. j.j.←JJ, how much of a project was it to adapt the carquest kit? I'll have to go back and check, but I believe mine is a 707C.Sully Quote Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-1181 Share on other sites More sharing options...
dphsully Posted August 24, 2005 Author Share Posted August 24, 2005 I have some NOS Mack filters. They are part number 236GB123A. 6" dia, 7 1/2" long with a 1 5/8" hole. Call me if they are something you can use.←Hi David,I'll check the measurements on the filter. Those numbers sound close. If I don't end us using the spin-on kit, I'll give you a call.Sully Quote Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-1182 Share on other sites More sharing options...
twostickmutt Posted August 24, 2005 Share Posted August 24, 2005 JJ, how much of a project was it to adapt the carquest kit? I'll have to go back and check, but I believe mine is a 707C.Sully←sully. it was no big deal at all. when i took my old filter housing off i found that that the feed and return ports in the block were already tapped. the feed is 1/2 inch pipe thread and the return is 1/8 inch pipe thread. find a place to mount the spin on,get some lines made up and your in business. the spin on housing and filter are about a foot tall. that's what you'll need for room. it's a good size oil filter so it'll get the job done. any more questions feel free to ask. j.j. Quote and remember "PREFORMANCE COUNTS" Link to comment https://www.bigmacktrucks.com/topic/61-707-oil-filters/#findComment-1189 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.