Hobert62 Posted April 1, 2020 Author Share Posted April 1, 2020 On 3/27/2020 at 9:35 PM, Coenut said: I have the jack you need. It's yours to borrow if you want too. I greatly appreciate the offer, but I really don’t like borrowing tools. Your kindness does show how great of group this really is, considering I don’t think our paths have ever crossed. Thank you! Quote Link to comment Share on other sites More sharing options...
Hobert62 Posted April 1, 2020 Author Share Posted April 1, 2020 On 3/27/2020 at 8:59 AM, JoeH said: We have the harbor freight truck trans jack, works well but you may want to make your own deck adapter to hold the transmission. The "safety" chain is a joke, and the 4 angle iron feet that bolt to the deck are slippery. Jack handle is very nice, it pivots around so you can operate it from almost anywhere. The jack is also nice to use for spoke hubs. Thanks too! One thing nice about the HF stuff is the price. I’ve had a few things I welded on / modified as soon as I brought them home. It was almost what I wanted when I bought it, but til I was done it was what I wanted. Quote Link to comment Share on other sites More sharing options...
Hobert62 Posted May 23, 2020 Author Share Posted May 23, 2020 I borrowed my buddies jack for this weekend. It’s a very nice simple design utilizing a bottle jack. I believe it was some type of military surplus. I decided to copy it and build my own. So far I had a lot of the stuff laying around. I’m going to a 4 wheel setup instead of 3 though, and to simplify some thing it’s gonna sit about 2” higher off the ground 1 Quote Link to comment Share on other sites More sharing options...
terry Posted May 23, 2020 Share Posted May 23, 2020 just remember two inches higher jack means your truck has to be two inches higher. terry 2 Quote Link to comment Share on other sites More sharing options...
JoeH Posted May 24, 2020 Share Posted May 24, 2020 5 hours ago, terry said: just remember two inches higher jack means your truck has to be two inches higher. terry Judging by those tires in the picture I think he's got that covered already! 1 Quote Link to comment Share on other sites More sharing options...
Hobert62 Posted May 24, 2020 Author Share Posted May 24, 2020 6 minutes ago, JoeH said: Judging by those tires in the picture I think he's got that covered already! At the moment 2” won’t mean much at all. I understand terry’s point though. Never know what the next project will be. 1 Quote Link to comment Share on other sites More sharing options...
JoeH Posted May 24, 2020 Share Posted May 24, 2020 It would suck to have to jack the truck up higher to get the trans out when you already have the engine resting on blocks. 1 Quote Link to comment Share on other sites More sharing options...
Hobert62 Posted May 24, 2020 Author Share Posted May 24, 2020 Came right out once I figured what to do at clutch linkage. Now any suggestions how to hold the engine up? It’s currently sitting on a large oak block and 20 ton bottle jack off bell housing . The trucks going to have to move forward about 20’ when it’s time to pull engine (my garage isn’t big enough). Quote Link to comment Share on other sites More sharing options...
Mack Technician Posted May 24, 2020 Share Posted May 24, 2020 I usually make a chain cradle between both steer axle leaf springs for a move across the shop. The pan is stronger than you’d think if it’s not rusted thin. Maybe lay a stiffener on the pan if concerned. 2 Quote Link to comment Share on other sites More sharing options...
david wild Posted May 24, 2020 Share Posted May 24, 2020 another good thing about a Fuller trans in a Mack the engine stays where it belongs when you pull the trans ?? 1 Quote Link to comment Share on other sites More sharing options...
Mack Technician Posted May 24, 2020 Share Posted May 24, 2020 As I recall, you can also cut a pipe the expanse of the inside of the frame rails. Lay the pipe crossways tight up to the open bell. Insert 2 bolts about 5” long into the bellhousing mount face wherever is close to the pipe... maybe 4 o’clock and 8 o’clock. Rest the engine onto the cross-pipe via the over-length bell bolts. 1 Quote Link to comment Share on other sites More sharing options...
Hobert62 Posted May 24, 2020 Author Share Posted May 24, 2020 8 minutes ago, Mack Technician said: As I recall, you can also cut a pipe the expanse of the inside of the frame rails. Lay the pipe crossways tight up to the open bell. Insert 2 bolts about 5” long into the bellhousing mount face wherever is close to the pipe... maybe 4 o’clock and 8 o’clock. Rest the engine onto the cross-pipe via the over-length bell bolts. I thought of using a chain around frame and some bell housing bolts but they are only 3/8” bolts and didn’t know if 2 would be heavy enough. Quote Link to comment Share on other sites More sharing options...
Mack Technician Posted May 24, 2020 Share Posted May 24, 2020 Grade 8, keep it close, been done. 1 Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted May 24, 2020 Share Posted May 24, 2020 I put a chain under the pan up to both frame rails ever time some of us pull a trans for safety.I have did this for years and will do this in about two weeks on the one i drive.I also put a jack under flywheel housing and if pan comes off then you have alot of things to use. 1 Quote glenn akers Link to comment Share on other sites More sharing options...
Popular Post Hobert62 Posted June 14, 2020 Author Popular Post Share Posted June 14, 2020 Here’s what I put together 6 Quote Link to comment Share on other sites More sharing options...
terry Posted June 15, 2020 Share Posted June 15, 2020 Some of the mack transmissions are pretty long, hope when it is balanced tail shaft does not hit the bottle jack. terry Quote Link to comment Share on other sites More sharing options...
Hobert62 Posted June 15, 2020 Author Share Posted June 15, 2020 (edited) 1 hour ago, terry said: Some of the mack transmissions are pretty long, hope when it is balanced tail shaft does not hit the bottle jack. terry My Mack Tranny is already out. Prob be the last one I have.(but I could be wrong). The one I copied the yoke sat right on top of the crossbar for jack just like it was made for it. Edited June 15, 2020 by Hobert62 1 Quote Link to comment Share on other sites More sharing options...
carlotpilot Posted June 15, 2020 Share Posted June 15, 2020 12 hours ago, Hobert62 said: Here’s what I put together looks pro` good job----------now paint it 1 Quote Link to comment Share on other sites More sharing options...
Hobert62 Posted June 15, 2020 Author Share Posted June 15, 2020 7 hours ago, carlotpilot said: looks pro` good job----------now paint it My dad said same thing about painting it. Quote Link to comment Share on other sites More sharing options...
j hancock Posted June 15, 2020 Share Posted June 15, 2020 Looks Good! Bet you will find other uses for the jack down the road. 1 Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.