byrohoe Posted March 28, 2020 Share Posted March 28, 2020 😕Hello I may have a question that has already been ask but after searching I am not finding anything helpful for my needs. I have a 07 Granite dump with 20k steer axel 30HF545P2. The inner oil seal is in need of replacement and my question is how to reseat and the torque required when I reassemble the hub/bearings. Thanks in advance for any input. Byron Quote Link to comment https://www.bigmacktrucks.com/topic/61734-07-granite-steer-axle-bearing-torque/ Share on other sites More sharing options...
Swishy Posted March 28, 2020 Share Posted March 28, 2020 My 2 cents worth TAX free Repack with grease if a seal fails with oil in hub U only got a few minutes/hours before all oil gone n U could end up in a ditch with grease if seal fails U know U gunna need fix the problem sum time nex week/month We torque up front steer hubs F tight with a 2 foot bar while spinn n the wheel ... then back off 1/8th or quarter turn of nut recheck wheel for looseness by wobblin wheel on jack with daylight under tyre after U dun a run or 2 cya Quote Link to comment https://www.bigmacktrucks.com/topic/61734-07-granite-steer-axle-bearing-torque/#findComment-447024 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.