cl733 Posted April 2, 2020 Share Posted April 2, 2020 I'm just trying to drop the mack carrier into the housing, it stops under it own weight with around 3/8 let before it sits flush. I can pull it down with mounting bolts, is that normal for it to have to be pulled down flush, and about what should the bolts holding down the carriere be torqued to Quote Link to comment https://www.bigmacktrucks.com/topic/61839-trying-to-install-mack-reman-carrier/ Share on other sites More sharing options...
thomastractorsvc Posted April 2, 2020 Share Posted April 2, 2020 I bought a couple of long bolts and made guide pins it helps with getting the carrier to sit down flush. I use the good RTV and when it's tacky I drop it on I usually have to wiggle it but the guide pins allows it to not make the RTV push out creating a leak Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/61839-trying-to-install-mack-reman-carrier/#findComment-447553 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.